Hi Alison, On Tuesday, May 21, 2013 11:03:01 AM, Alison Wang wrote: > MVF600TWR is a board based on Vybrid MVF600 SoC. > > This patch adds basic support for Vybrid MVF600TWR board. > > Signed-off-by: Alison Wang <b18...@freescale.com> > Signed-off-by: Jason Jin <jason....@freescale.com> > Signed-off-by: TsiChung Liew <tsicl...@gmail.com>
[...] > diff --git a/include/configs/mvf600twr.h b/include/configs/mvf600twr.h > new file mode 100644 > index 0000000..1cfb9f6 > --- /dev/null > +++ b/include/configs/mvf600twr.h > @@ -0,0 +1,140 @@ > +/* > + * Copyright 2013 Freescale Semiconductor, Inc. > + * > + * Configuration settings for the Freescale Vybrid mvf600twr board. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#ifndef __CONFIG_H > +#define __CONFIG_H > + > +#include <asm/arch/imx-regs.h> > +#include <config_cmd_default.h> > + > +#define CONFIG_MVF600 > + [...] > +#define CONFIG_CMD_PING > +#define CONFIG_CMD_DHCP > +#define CONFIG_CMD_MII > +#define CONFIG_CMD_NET > +#define CONFIG_FEC_MXC > +#define CONFIG_MII > +#define IMX_FEC_BASE ENET_BASE_ADDR > +#define CONFIG_FEC_XCV_TYPE RMII > +#define CONFIG_ETHPRIME "FEC" You don't need to define this one with only 1 Ethernet interface defined. But isn't the MVF600 a dual-Ethernet SoC? > +#define CONFIG_FEC_MXC_PHYADDR 0 > +#define CONFIG_PHYLIB > +#define CONFIG_PHY_MICREL > + > +#define CONFIG_BOOTDELAY 3 > + > +#define CONFIG_SYS_TEXT_BASE 0x3f008000 > + > +/* Miscellaneous configurable options */ > +#define CONFIG_SYS_LONGHELP /* undef to save memory */ > +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ > +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " > +#define CONFIG_SYS_PROMPT "Vybrid U-Boot > " > +#undef CONFIG_AUTO_COMPLETE > +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ > +#define CONFIG_SYS_PBSIZE \ > + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) > +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ > +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE > + > +#define CONFIG_SYS_MEMTEST_START 0x80010000 > +#define CONFIG_SYS_MEMTEST_END 0x87C00000 You now have to #define CONFIG_CMD_MEMTEST for those to be useful. > + > +#define CONFIG_SYS_LOAD_ADDR 0x80010000 > + > +#define CONFIG_SYS_HZ 1000 > + > +/* > + * Stack sizes > + * The stack sizes are set up in start.S using the settings below > + */ > +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ > + > +/* Physical memory map */ > +#define CONFIG_NR_DRAM_BANKS 1 > +#define PHYS_SDRAM (0x80000000) > +#define PHYS_SDRAM_SIZE (128 * 1024 * 1024) > + > +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM > +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR > +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE > + > +#define CONFIG_SYS_INIT_SP_OFFSET \ > + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) > +#define CONFIG_SYS_INIT_SP_ADDR \ > + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) > + > +/* FLASH and environment organization */ > +#define CONFIG_SYS_NO_FLASH > + > +#define CONFIG_ENV_SIZE (8 * 1024) > +#define CONFIG_ENV_IS_IN_MMC > + > +#define CONFIG_ENV_OFFSET (12 * 64 * 1024) > +#define CONFIG_SYS_MMC_ENV_DEV 0 > + > +#define CONFIG_OF_LIBFDT > +#define CONFIG_CMD_BOOTZ > + > +#endif > -- > 1.8.0 Best regards, Benoît _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot