Hi Ruud, Le Fri, 7 Jun 2013 11:28:54 +0200, Ruud Commandeur <rcommand...@clb.nl> a écrit : > I have not come any further yet in finding the real cause. For now, I just > tested with workarounds like lowering the ARP timeout and skipping the phy > reset (or only reset for the 1st transfer). Note that also the phy reset and > waiting for "link-up" takes about 2 seconds every time. I did not realise > earlier that it would take this long, but this is the part before the "TFTP > from server..." line is displayed and he transfer even starts. > isn't your problem related to the fact that when you reset the PHY it samples some pins to get some settings and that after the first reset it could gets wrong settings because the i.MX pins are in a wrong state (because handled by the FEC) leading to the errors you meet ?
Eric _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
