Signed-off-by: Dennis Gilmore <den...@ausil.us>
---
include/configs/wandboard.h | 40 +++++++++++++++++++++++++++++++++++-----
1 file changed, 35 insertions(+), 5 deletions(-)
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index e9c7e64..02d8968 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -40,6 +40,9 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
+/* enable generic distro config */
+#define DISTRO_DEFAULTS 1
+
/* Command definition */
#include <config_cmd_default.h>
@@ -48,7 +51,6 @@
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_SETEXPR
-#define CONFIG_BOOTDELAY 5
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
@@ -65,6 +67,9 @@
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
+
+#define CONFIG_BOOTDELAY 5
+
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
@@ -74,6 +79,11 @@
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+/* Ethernet Configuration */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
@@ -113,8 +123,30 @@
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "fdt_addr=0x11000000\0" \
+ "fdt_addr=0x11100000\0" \
+ "fdt_addr_r=0x11200000\0" \
+ "pxefile_addr_r=0x11300000\0" \
+ "scr_addr_r=0x11400000\0" \
+ "kernel_addr_r=0x11500000\0" \
+ "ramdisk_addr_r=0x13500000\0" \
"boot_fdt=try\0" \
+ "bootcmd_setup=mmc rescan\0" \
+ "bootcmd_pxe=setenv bootfile \"\" ;dhcp; tftp ${fdt_addr}
/dtb/${fdt_file}; pxe get; pxe boot\0" \
+ "bootcmd_disk_scr=ext2load ${boot_ifc} ${bootdevice} ${scr_addr_r}
boot.scr && source ${scr_addr_r}\0" \
+ "bootcmd_disk_sysboot1=setenv bootfile /boot/extlinux/extlinux.conf;
sysboot ${boot_ifc} ${bootdevice} ext2\0" \
+ "bootcmd_disk_sysboot2=setenv bootfile /extlinux/extlinux.conf; sysboot
${boot_ifc} ${bootdevice} ext2\0" \
+ "bootcmd_disk_uenv=ext2load ${boot_ifc} ${bootdevice} ${uenv_addr_r}
uEnv.txt; env import -t ${uenv_addr_r} ${filesize}; run bootcmd_uenv\0" \
+ "bootcmd_disk_kernel=ext2load ${boot_ifc} ${bootdevice}
${kernel_addr_r} vmlinuz && ext2load ${boot_ifc} ${bootdevice}
${ramdisk_addr_r} initrd.img && bootz ${kernel_addr_r}
${ramdisk_addr_r}:${filesize} ${fdt_addr}\0" \
+ "bootcmd_disk=ext2load ${boot_ifc} ${bootdevice} ${fdt_addr}
/boot/dtb/${fdt_file}; ext2load ${boot_ifc} ${bootdevice} ${fdt_addr}
/dtb/${fdt_file};run bootcmd_disk_sysboot1; run bootcmd_disk_sysboot2; run
bootcmd_disk_uenv; run bootcmd_disk_scr; run bootcmd_disk_kernel\0" \
+ "bootcmd_sata=setenv boot_ifc scsi; scsi scan && run bootcmd_disk\0" \
+ "bootcmd_mmc=setenv boot_ifc mmc; mmc rescan && run bootcmd_disk\0" \
+ "bootcmd_default=run bootcmd_mmc; run bootcmd_sata; run bootcmd_pxe\0" \
+ "localcmd=run bootcmd_mmc\0" \
+ "bootdevice=0\0" \
+ "bootargs=console=ttymxc0 root=LABEL=rootfs\0" \
+ "bootdelay=2\0" \
+ "bootretry=90\0" \
+ "netretry=once\0" \
"ip_dyn=yes\0" \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"mmcpart=1\0" \
@@ -183,6 +215,7 @@
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \
+ "run bootcmd_default; " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
@@ -230,9 +263,6 @@
#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif
--
1.8.4.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
