> Hi , > I have added mmc driver into the vexpress64 board file for uboot and tested > it on FVP base model. I tried booting a kernel on that but it is aborting > with the following message: > Final value for argc=3 > Loading Kernel Image ... OK > kernel loaded at 0x00080000, end = 0x00827024 > using: FDT > reserving fdt memory region: addr=80000000 size=10000 > ## initrd_high = 0xffffffffffffffff, copy_to_ram = 1 > ramdisk load start = 0x00000000, ramdisk load end = 0x00000000 > ## device tree at 0000000090008000 ... 000000009000a850 (len=22609 [0x5851]) > Loading Device Tree to 000000009fffa000, end 000000009ffff850 ... OK > Initial value for argc=3 > Final value for argc=3 > ## Transferring control to Linux (at address 80000)... > Starting kernel ... > > "Synchronous Abort" handler, esr 0x02000000 > ELR: 80000 > LR: fff90fc8 > x0 : 000000009fffa000 x1 : 000000001c090000 > x2 : 000000001c090000 x3 : 0000000000000020 > x4 : 00000000fff6b834 x5 : 0000000000000000 > x6 : 00000000fff6bb40 x7 : 00000000ffffffd0 > x8 : 000000000000000f x9 : 000000007ff8e000 > x10: 00000000fffb7188 x11: 0000000000000000 > x12: 0000000000006000 x13: 0000000000000004 > x14: 0000000000000003 x15: 00000000fffc7c20 > x16: 0000000000000000 x17: 0000000000000000 > x18: 00000000fff6beb8 x19: 0000000000080000 > x20: 00000000fffc7a70 x21: 0000000000000000 > x22: 0000000000000000 x23: 00000000fff6d8d8 > x24: 0000000000000000 x25: 00000000fffc2630 > x26: 0000000000000000 x27: 0000000080008000 > x28: 0000000000000000 x29: 00000000fff6bb40 > > Can anyone please provide the procedure on how to boot the kernel with > u-boot on armv8 models ? I always use mkimage converting kernel to uImage and booting it. It works fine. Wish this help you.
David _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot