hi Tom, > On Thu, May 22, 2014 at 10:26:17PM +0800, feng...@phytium.com.cn wrote: >> >> >>> Hi , >>> I have added mmc driver into the vexpress64 board file for uboot and tested >>> it on FVP base model. I tried booting a kernel on that but it is aborting >>> with the following message: >>> Final value for argc=3 >>> Loading Kernel Image ... OK >>> kernel loaded at 0x00080000, end = 0x00827024 >>> using: FDT >>> reserving fdt memory region: addr=80000000 size=10000 >>> ## initrd_high = 0xffffffffffffffff, copy_to_ram = 1 >>> ramdisk load start = 0x00000000, ramdisk load end = 0x00000000 >>> ## device tree at 0000000090008000 ... 000000009000a850 (len=22609 [0x5851]) >>> Loading Device Tree to 000000009fffa000, end 000000009ffff850 ... OK >>> Initial value for argc=3 >>> Final value for argc=3 >>> ## Transferring control to Linux (at address 80000)... >>> Starting kernel ... >>> >>> "Synchronous Abort" handler, esr 0x02000000 >>> ELR: 80000 >>> LR: fff90fc8 >>> x0 : 000000009fffa000 x1 : 000000001c090000 >>> x2 : 000000001c090000 x3 : 0000000000000020 >>> x4 : 00000000fff6b834 x5 : 0000000000000000 >>> x6 : 00000000fff6bb40 x7 : 00000000ffffffd0 >>> x8 : 000000000000000f x9 : 000000007ff8e000 >>> x10: 00000000fffb7188 x11: 0000000000000000 >>> x12: 0000000000006000 x13: 0000000000000004 >>> x14: 0000000000000003 x15: 00000000fffc7c20 >>> x16: 0000000000000000 x17: 0000000000000000 >>> x18: 00000000fff6beb8 x19: 0000000000080000 >>> x20: 00000000fffc7a70 x21: 0000000000000000 >>> x22: 0000000000000000 x23: 00000000fff6d8d8 >>> x24: 0000000000000000 x25: 00000000fffc2630 >>> x26: 0000000000000000 x27: 0000000080008000 >>> x28: 0000000000000000 x29: 00000000fff6bb40 >>> >>> Can anyone please provide the procedure on how to boot the kernel with >>> u-boot on armv8 models ? >> I always use mkimage converting kernel to uImage and booting it. It works >> fine. >> Wish this help you. > > Which version of the model are you using and which kernel tree? Thanks! > The model is the most recent FVP from linaro website and the kernel is a very old one. But mkimage has nothing to do with the kernel. uImage produced by mkimage is correctly loaded by u-boot for aarch64. I will make a test with the most recently kernel and give you feedback.
Best regards, David _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot