Hi,
On 22 May 2014 22:06, Tom Rini <tr...@ti.com> wrote: > On Thu, May 22, 2014 at 10:26:17PM +0800, feng...@phytium.com.cn wrote: > > > > > > > Hi , > > > I have added mmc driver into the vexpress64 board file for uboot and > tested > > > it on FVP base model. I tried booting a kernel on that but it is > aborting > > > with the following message: > > > Final value for argc=3 > > > Loading Kernel Image ... OK > > > kernel loaded at 0x00080000, end = 0x00827024 > > > using: FDT > > > reserving fdt memory region: addr=80000000 size=10000 > > > ## initrd_high = 0xffffffffffffffff, copy_to_ram = 1 > > > ramdisk load start = 0x00000000, ramdisk load end = 0x00000000 > > > ## device tree at 0000000090008000 ... 000000009000a850 (len=22609 > [0x5851]) > > > Loading Device Tree to 000000009fffa000, end 000000009ffff850 ... OK > > > Initial value for argc=3 > > > Final value for argc=3 > > > ## Transferring control to Linux (at address 80000)... > > > Starting kernel ... > > > > > > "Synchronous Abort" handler, esr 0x02000000 > > > ELR: 80000 > > > LR: fff90fc8 > > > x0 : 000000009fffa000 x1 : 000000001c090000 > > > x2 : 000000001c090000 x3 : 0000000000000020 > > > x4 : 00000000fff6b834 x5 : 0000000000000000 > > > x6 : 00000000fff6bb40 x7 : 00000000ffffffd0 > > > x8 : 000000000000000f x9 : 000000007ff8e000 > > > x10: 00000000fffb7188 x11: 0000000000000000 > > > x12: 0000000000006000 x13: 0000000000000004 > > > x14: 0000000000000003 x15: 00000000fffc7c20 > > > x16: 0000000000000000 x17: 0000000000000000 > > > x18: 00000000fff6beb8 x19: 0000000000080000 > > > x20: 00000000fffc7a70 x21: 0000000000000000 > > > x22: 0000000000000000 x23: 00000000fff6d8d8 > > > x24: 0000000000000000 x25: 00000000fffc2630 > > > x26: 0000000000000000 x27: 0000000080008000 > > > x28: 0000000000000000 x29: 00000000fff6bb40 > > > > > > Can anyone please provide the procedure on how to boot the kernel with > > > u-boot on armv8 models ? > > I always use mkimage converting kernel to uImage and booting it. It > works fine. > > Wish this help you. > > Which version of the model are you using and which kernel tree? Thanks! > I am using 3.10 Linaro stable kernel which is boots up on UEFI [1]. I will give a try with the mainline kernel next. This is the FVP model version: FVP_VE_AEMv8A -v Fast Models [0.8.5202 (Oct 22 2013)] Copyright 2000-2013 ARM Limited. All Rights Reserved. Top component name: FVP_Base_AEMv8A_AEMv8A [1] https://git.linaro.org/kernel/linux-linaro-stable.git/ > > -- > Tom >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot