Benoît Thébaudeau-2 wrote > Also, check the CONFIG_SYS_TEXT_BASE of your board. From your log, I'm > wondering if it's not set too high, resulting in an overlap of the > pre- and post-relocation addresses occupied by your binary in the > 256-MiB case.
BINGO!!! Good catch Benoît, thank you. I changed it from 9FF80000 to 9F000000 and now it boots. Looking at the original log...it relocated 90KB above text base. Not quite enough room... -------- U-Boot code: 9FF80000 -> 9FFA6840 BSS: -> 9FFD944C . Relocating to 9ff96000, new gd at 9fe55ed0, sp at 9fe55eb0 ------ On a side note, how involved would it be to convert to 2015.01? I've already ported 3 boards for 2014.07. Will everything I've done work perfectly fine with 2015.01? -- View this message in context: http://u-boot.10912.n7.nabble.com/U-Boot-stuck-after-relocation-attempt-on-MX51-board-tp206738p206924.html Sent from the U-Boot mailing list archive at Nabble.com. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot