Hi Peng, Tim, On 19/05/2015 02:21, Peng Fan wrote:
> > U-Boot 2015.07-rc1-00260-g44bf513 (May 19 2015 - 09:14:52) > > CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz) > CPU: Extended Commercial temperature grade (-20C to 105C) at 33C > Reset cause: POR > Board: MX6SX SABRE SDB > I2C: ready > DRAM: 1 GiB > PMIC: PFUZE100 ID=0x11 > MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 > In: serial > Out: serial > Err: serial > Net: FEC [PRIME] > Hit any key to stop autoboot: 0 > => > > Tested-by: Peng Fan <peng....@freescale.com> > Thanks. It looks like the last issue was solved - if nobody else complains, these patches are ready for merging. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot