On 20/05/2015 16:45, Otavio Salvador wrote: > On Wed, May 20, 2015 at 11:43 AM, Markus Niebel <list-09_u-b...@tqsc.de> > wrote: >> Am 18.05.2015 um 15:56 schrieb Tim Harvey: >>> Use Temperature grade info in OTP/eFUSE for thermal management and display >>> of >>> thermal data. >>> >>> Cc: Stefan Roese <s...@denx.de> >>> Cc: Eric Nelson <eric.nel...@boundarydevices.com> >>> Cc: Heiko Schocher <h...@denx.de> >>> Cc: Nikita Kiryanov <nik...@compulab.co.il> >>> Cc: Jon Nettleton <jon.nettle...@gmail.com> >>> Cc: Jason Liu <r64...@freescale.com> >>> Cc: Ye Li <b37...@freescale.com> >>> Cc: Fabio Estevam <fabio.este...@freescale.com> >>> Cc: Christian Gmeiner <christian.gmei...@gmail.com> >>> Cc: Markus Niebel <markus.nie...@tq-group.com> >>> Cc: Peng Fan <b51...@freescale.com> >>> Signed-off-by: Tim Harvey <thar...@gateworks.com> >>> --- >>> v3: >>> - include display of temperature grade for IMX6SX >>> v2: >>> - split into two series: 1 for CPU frequency, other for Temperature grade >>> >>> Tim Harvey (4): >>> mx6: add OTP bank1 registers >>> imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from >>> OTP >>> imx: mx6: add display of CPU temperature grade in print_cpuinfo() >>> thermal: imx_thermal: use CPU temperature grade for trip points >>> >>> arch/arm/cpu/armv7/mx6/soc.c | 38 >>> +++++++++++++++++++++++++++++++ >>> arch/arm/imx-common/cpu.c | 25 ++++++++++++++++---- >>> arch/arm/include/asm/arch-mx6/imx-regs.h | 19 ++++++++++++++++ >>> arch/arm/include/asm/arch-mx6/sys_proto.h | 1 + >>> drivers/thermal/imx_thermal.c | 29 +++++++++++++++-------- >>> include/imx_thermal.h | 6 +++++ >>> 6 files changed, 104 insertions(+), 14 deletions(-) >>> >> >> Tested on TQMa6Q and TQMa6D >> >> following patches were also applied: >> https://patchwork.ozlabs.org/patch/473405/ >> https://patchwork.ozlabs.org/patch/473406/ >> >> Tested-by: Markus Niebel <markus.nie...@tq-group.com> > > I think those are applied in Stephano's tree today.
Yes, Markus - patches are already merged into imx. Regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
