Am 18.05.2015 um 15:56 schrieb Tim Harvey: > Use Temperature grade info in OTP/eFUSE for thermal management and display of > thermal data. > > Cc: Stefan Roese <s...@denx.de> > Cc: Eric Nelson <eric.nel...@boundarydevices.com> > Cc: Heiko Schocher <h...@denx.de> > Cc: Nikita Kiryanov <nik...@compulab.co.il> > Cc: Jon Nettleton <jon.nettle...@gmail.com> > Cc: Jason Liu <r64...@freescale.com> > Cc: Ye Li <b37...@freescale.com> > Cc: Fabio Estevam <fabio.este...@freescale.com> > Cc: Christian Gmeiner <christian.gmei...@gmail.com> > Cc: Markus Niebel <markus.nie...@tq-group.com> > Cc: Peng Fan <b51...@freescale.com> > Signed-off-by: Tim Harvey <thar...@gateworks.com> > --- > v3: > - include display of temperature grade for IMX6SX > v2: > - split into two series: 1 for CPU frequency, other for Temperature grade > > Tim Harvey (4): > mx6: add OTP bank1 registers > imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from > OTP > imx: mx6: add display of CPU temperature grade in print_cpuinfo() > thermal: imx_thermal: use CPU temperature grade for trip points > > arch/arm/cpu/armv7/mx6/soc.c | 38 > +++++++++++++++++++++++++++++++ > arch/arm/imx-common/cpu.c | 25 ++++++++++++++++---- > arch/arm/include/asm/arch-mx6/imx-regs.h | 19 ++++++++++++++++ > arch/arm/include/asm/arch-mx6/sys_proto.h | 1 + > drivers/thermal/imx_thermal.c | 29 +++++++++++++++-------- > include/imx_thermal.h | 6 +++++ > 6 files changed, 104 insertions(+), 14 deletions(-) >
Tested on TQMa6Q and TQMa6D following patches were also applied: https://patchwork.ozlabs.org/patch/473405/ https://patchwork.ozlabs.org/patch/473406/ Tested-by: Markus Niebel <markus.nie...@tq-group.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot