> -----Original Message----- > From: Michal Simek [mailto:michal.si...@xilinx.com] > Sent: Montag, 26. Oktober 2015 14:52 > To: Jagan Teki <jt...@openedev.com>; Hoefle Marco > <marco.hoe...@nanotronic.ch>; Michal Simek <michal.si...@xilinx.com> > Cc: u-boot@lists.denx.de > Subject: Re: [U-Boot] u-boot device model SPI + SPI Flash > > On 10/23/2015 12:20 PM, Jagan Teki wrote: > > On 23 October 2015 at 15:42, Hoefle Marco <marco.hoe...@nanotronic.ch> > wrote: > >> Maybe somebody has a valid u-boot dts file for a microblaze system with > an SPI core? That would helpful. > >> We want to move from a parallel nor flash to a SPI flash for FPGA config, > u-boot, Linux Kernel and rootfs. > >> The last missing part is u-boot. The kernel dts file is ok and the mtd > partitions are set up correctly. > > > > I even grepped on linux/arch/microblaze couldn't get much info, So > > added Michal he well aware of this may be he can help. > > > http://www.xilinx.com/support/download/index.html/content/xilinx/en/do > wnloadNav/embedded-design-tools/2015-2.html > > ac701 bsp and I expect also Kc705.
I downloaded the AC701 bsp file but it is not a valid archive. Do I need to use (and learn how to use) the 3 GB pertalinux tools to build u-boot for Microblaze? The u-boot config for the AC701 and the dts file would probably sufficient. > Thanks, > Michal > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
