On Tue, Apr 19, 2016 at 11:26:30AM -0500, Andreas Dannenberg wrote: > On Mon, Apr 11, 2016 at 06:37:14PM -0500, Daniel Allred wrote: > > Update the CPU string output so that the device > > type is now included as part of the CPU string that > > is printed as the SPL or u-boot comes up. This update > > adds a suffix of the form "-GP" or "-HS" for production > > devices, so that general purpose (GP) and high security > > (HS) can be distiguished. Applies to all OMAP5 variants. > > When I'm building for AM437x HS and running on the device I don't see > that output. It seems like there is something funny going on with > CONFIG_SPL_DISPLAY_PRINT. Even though this definition is activated in > ti_omap4_common.h and ti_omap5_common.h it is not seen by > preloader_console_init() in spl.c, hence the function that prints the > chip-type/rev specifics never gets invoked.
So when I run the patches on actual DRA72x HS and DRA74x HS hardware I'll get the device name/type output by SPL as expected so that piece works. However this patch's commit message implies the same should also work on AM437x HS which it doesn't. I don't have AM437x non-secure hardware at my desk but I looked at some boot logs from our test farms and I also don't see the device ID output by SPL so that may be just how it currently is implemented generally for AM437* and has nothing to do with the patch discussed here. Madan, please comment/chime-in as needed. Tested-by: Andreas Dannenberg <dannenb...@ti.com> -- Andreas Dannenberg Texas Instruments Inc _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot