From: Stefan Agner <stefan.ag...@toradex.com>
Add a new top-level config option so support booting an image stored
in RAM. This allows to move the RAM boot support into a sparate file
and having a single condition to compile that file.
Signed-off-by: Stefan Agner <stefan.ag...@toradex.com>
---
The series has been build tested using buildman.
$ ./tools/buildman/buildman
...
Building current source for 1245 boards (8 threads, 1 job per thread)
1034 0 211 /1245 0:00:03 : P1022DS_NAND
--
Stefan
Changes in v3:
- Use default y in ...
Changes in v2:
- Added missing new file spl_ram.c
- Add new config also to defconfig file
common/spl/Kconfig | 12 +++++++--
common/spl/Makefile | 1 +
common/spl/spl.c | 58 -----------------------------------------
common/spl/spl_ram.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 84 insertions(+), 60 deletions(-)
create mode 100644 common/spl/spl_ram.c
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index ea084f462b..b1aa1483c9 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -449,9 +449,17 @@ config SPL_POWER_SUPPORT
in drivers/power, drivers/power/pmic and drivers/power/regulator
as part of an SPL build.
+config SPL_RAM_SUPPORT
+ bool "Support booting from RAM"
+ depends on SPL
+ default y if MICROBLAZE || ARCH_SOCFPGA || TEGRA || ARCH_ZYNQ
+ help
+ Enable booting of an image in RAM. The image can be preloaded or
+ it can be loaded by SPL directly into RAM (e.g. using USB).
+
config SPL_RAM_DEVICE
bool "Support booting from preloaded image in RAM"
- depends on SPL
+ depends on SPL_RAM_SUPPORT
default y if MICROBLAZE || ARCH_SOCFPGA || TEGRA || ARCH_ZYNQ
help
Enable booting of an image already loaded in RAM. The image has to
@@ -558,7 +566,7 @@ choice
config SPL_DFU_RAM
bool "RAM device"
- depends on SPL_DFU_SUPPORT
+ depends on SPL_DFU_SUPPORT && SPL_RAM_SUPPORT
help
select RAM/DDR memory device for loading binary images
(u-boot/kernel) to the selected device partition using
diff --git a/common/spl/Makefile b/common/spl/Makefile
index ed02635e72..1933cbdfed 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -26,4 +26,5 @@ obj-$(CONFIG_SPL_EXT_SUPPORT) += spl_ext.o
obj-$(CONFIG_SPL_SATA_SUPPORT) += spl_sata.o
obj-$(CONFIG_SPL_DFU_SUPPORT) += spl_dfu.o
obj-$(CONFIG_SPL_SPI_LOAD) += spl_spi.o
+obj-$(CONFIG_SPL_RAM_SUPPORT) += spl_ram.o
endif
diff --git a/common/spl/spl.c b/common/spl/spl.c
index f7df834e32..2f3b6a47f8 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -170,64 +170,6 @@ __weak void __noreturn jump_to_image_no_args(struct
spl_image_info *spl_image)
image_entry();
}
-#ifndef CONFIG_SPL_LOAD_FIT_ADDRESS
-# define CONFIG_SPL_LOAD_FIT_ADDRESS 0
-#endif
-
-#if defined(CONFIG_SPL_RAM_DEVICE) || defined(CONFIG_SPL_DFU_SUPPORT)
-static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector,
- ulong count, void *buf)
-{
- debug("%s: sector %lx, count %lx, buf %lx\n",
- __func__, sector, count, (ulong)buf);
- memcpy(buf, (void *)(CONFIG_SPL_LOAD_FIT_ADDRESS + sector), count);
- return count;
-}
-
-static int spl_ram_load_image(struct spl_image_info *spl_image,
- struct spl_boot_device *bootdev)
-{
- struct image_header *header;
-
- header = (struct image_header *)CONFIG_SPL_LOAD_FIT_ADDRESS;
-
-#if defined(CONFIG_SPL_DFU_SUPPORT)
- if (bootdev->boot_device == BOOT_DEVICE_DFU)
- spl_dfu_cmd(0, "dfu_alt_info_ram", "ram", "0");
-#endif
-
- if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
- image_get_magic(header) == FDT_MAGIC) {
- struct spl_load_info load;
-
- debug("Found FIT\n");
- load.bl_len = 1;
- load.read = spl_ram_load_read;
- spl_load_simple_fit(spl_image, &load, 0, header);
- } else {
- debug("Legacy image\n");
- /*
- * Get the header. It will point to an address defined by
- * handoff which will tell where the image located inside
- * the flash. For now, it will temporary fixed to address
- * pointed by U-Boot.
- */
- header = (struct image_header *)
- (CONFIG_SYS_TEXT_BASE - sizeof(struct image_header));
-
- spl_parse_image_header(spl_image, header);
- }
-
- return 0;
-}
-#if defined(CONFIG_SPL_RAM_DEVICE)
-SPL_LOAD_IMAGE_METHOD("RAM", 0, BOOT_DEVICE_RAM, spl_ram_load_image);
-#endif
-#if defined(CONFIG_SPL_DFU_SUPPORT)
-SPL_LOAD_IMAGE_METHOD("USB DFU", 0, BOOT_DEVICE_DFU, spl_ram_load_image);
-#endif
-#endif
-
int spl_init(void)
{
int ret;
diff --git a/common/spl/spl_ram.c b/common/spl/spl_ram.c
new file mode 100644
index 0000000000..b2645a1948
--- /dev/null
+++ b/common/spl/spl_ram.c
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2016
+ * Xilinx, Inc.
+ *
+ * (C) Copyright 2016
+ * Toradex AG
+ *
+ * Michal Simek <michal.si...@xilinx.com>
+ * Stefan Agner <stefan.ag...@toradex.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <spl.h>
+#include <libfdt.h>
+
+#ifndef CONFIG_SPL_LOAD_FIT_ADDRESS
+# define CONFIG_SPL_LOAD_FIT_ADDRESS 0
+#endif
+
+static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector,
+ ulong count, void *buf)
+{
+ debug("%s: sector %lx, count %lx, buf %lx\n",
+ __func__, sector, count, (ulong)buf);
+ memcpy(buf, (void *)(CONFIG_SPL_LOAD_FIT_ADDRESS + sector), count);
+ return count;
+}
+
+static int spl_ram_load_image(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev)
+{
+ struct image_header *header;
+
+ header = (struct image_header *)CONFIG_SPL_LOAD_FIT_ADDRESS;
+
+#if defined(CONFIG_SPL_DFU_SUPPORT)
+ if (bootdev->boot_device == BOOT_DEVICE_DFU)
+ spl_dfu_cmd(0, "dfu_alt_info_ram", "ram", "0");
+#endif
+
+ if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
+ image_get_magic(header) == FDT_MAGIC) {
+ struct spl_load_info load;
+
+ debug("Found FIT\n");
+ load.bl_len = 1;
+ load.read = spl_ram_load_read;
+ spl_load_simple_fit(spl_image, &load, 0, header);
+ } else {
+ debug("Legacy image\n");
+ /*
+ * Get the header. It will point to an address defined by
+ * handoff which will tell where the image located inside
+ * the flash. For now, it will temporary fixed to address
+ * pointed by U-Boot.
+ */
+ header = (struct image_header *)
+ (CONFIG_SYS_TEXT_BASE - sizeof(struct image_header));
+
+ spl_parse_image_header(spl_image, header);
+ }
+
+ return 0;
+}
+#if defined(CONFIG_SPL_RAM_DEVICE)
+SPL_LOAD_IMAGE_METHOD("RAM", 0, BOOT_DEVICE_RAM, spl_ram_load_image);
+#endif
+#if defined(CONFIG_SPL_DFU_SUPPORT)
+SPL_LOAD_IMAGE_METHOD("DFU", 0, BOOT_DEVICE_DFU, spl_ram_load_image);
+#endif
+
+
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
