On Fri, Jun 9, 2017 at 5:13 PM, Stefan Agner <ste...@agner.ch> wrote: > From: Stefan Agner <stefan.ag...@toradex.com> > > i.MX 6UL and 6ULL have different boot device capabilities and > use therefor use a different boot device selection table than > other i.MX 6 devices. Particularly, the value which has been > used so far (b0001) is assigned to QSPI boot for these two > devices. > > There is no common reserved value for all i.MX 6devices. Use > b0010 for i.MX 6UL and 6ULL via compile time ifdef. > > Reported-by: Joël Esponde <joel.espo...@honeywell.com> > Signed-off-by: Stefan Agner <stefan.ag...@toradex.com>
Thanks for the patch. Joël, could you please test it and reply with your Tested-by? Thanks _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot