Hi Stefan, Why did you take the value 0x20 in the table entry instead of the value 0x00 as it is, for example, in the NXP U-Boot?
Is it because this boot mode does not exist in the iMX6UL SOC? Joël Esponde Honeywell | Safety and Productivity Solutions > -----Message d'origine----- > De : Fabio Estevam [mailto:feste...@gmail.com] > Envoyé : samedi 10 juin 2017 00:10 > À : Stefan Agner <ste...@agner.ch>; Esponde, Joel > <joel.espo...@honeywell.com> > Cc : Stefano Babic <sba...@denx.de>; Fabio Estevam > <fabio.este...@nxp.com>; Stefan Agner <stefan.ag...@toradex.com>; U- > Boot-Denx <u-boot@lists.denx.de> > Objet : Re: [U-Boot] [PATCH] imx: mx6ull: fix USB bmode for i.MX 6UL and > 6ULL > > On Fri, Jun 9, 2017 at 5:13 PM, Stefan Agner <ste...@agner.ch> wrote: > > From: Stefan Agner <stefan.ag...@toradex.com> > > > > i.MX 6UL and 6ULL have different boot device capabilities and use > > therefor use a different boot device selection table than other i.MX 6 > > devices. Particularly, the value which has been used so far (b0001) is > > assigned to QSPI boot for these two devices. > > > > There is no common reserved value for all i.MX 6devices. Use > > b0010 for i.MX 6UL and 6ULL via compile time ifdef. > > > > Reported-by: Joël Esponde <joel.espo...@honeywell.com> > > Signed-off-by: Stefan Agner <stefan.ag...@toradex.com> > > Thanks for the patch. > > Joël, could you please test it and reply with your Tested-by? > > Thanks _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot