On 07/21/2017 10:54 AM, Bin Meng wrote: > Hi Marek, > > On Thu, Jul 20, 2017 at 8:20 PM, Marek Vasut <ma...@denx.de> wrote: >> On 07/20/2017 02:16 PM, Bin Meng wrote: >>> Hi Marek, >>> >>> On Thu, Jul 20, 2017 at 7:12 AM, Bin Meng <bmeng...@gmail.com> wrote: >>>> This series is the final series of the xHCI driver update. >>>> >>>> This adds the missing interrupt transfer support to xHCI driver, so >>>> that devices like USB keyboard that uses interrupt transfer when >>>> CONFIG_SYS_USB_EVENT_POLL is defined can work. >>>> >>>> This also adds full speed device support. Unlike low/high/super speed >>>> devices, full speed device may report its endpoint 0 max packet size >>>> as 8/16/32/64. xHCI driver guesses 64 for the first attempt to get the >>>> initial 8 bytes device descriptor, and later adjusts the context for >>>> endpoint 0. >>>> >>>> This series also made several updates to xHCI driver to conform with >>>> the spec. >>>> >>>> Previous two series: >>>> [1]: usb: xhci: Fix USB xHCI support on Intel platform >>>> https://lists.denx.de/pipermail/u-boot/2017-June/296166.html >>>> [2]: usb: hub: Support USB 3.0 hubs >>>> https://lists.denx.de/pipermail/u-boot/2017-June/296284.html >>>> >>>> This series is available at u-boot-x86/xhci-working3 for testing. >>>> >>>> Changes in v3: >>>> - rebase on u-boot-usb/master >>>> - add changes to poplar.h >>>> >>>> Bin Meng (13): >>>> usb: xhci: Add interrupt transfer support >>>> usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board >>>> configs >>>> usb: kbd: kconfig: Set a default polling mechanism for USB keyboard >>>> usb: Only get 64 bytes device descriptor for full speed devices >>>> usb: Read device descriptor after device is addressed for xHCI >>>> usb: xhci: Fix max packet size for full speed device endpoint 0 >>>> usb: hub: Clear port reset before usb_hub_port_connect_change() >>>> usb: hub: Clear BH reset status change for a 3.0 hub >>>> usb: Handle audio extension endpoint descriptor in usb_parse_config() >>>> usb: xhci: Honor endpoint's interval >>>> usb: xhci: Program max burst size for endpoint >>>> usb: xhci: Set 'Error Count' to 0 for isoch endpoints >>>> usb: xhci: Set 'Average TRB Length' to 8 for control endpoints >>>> >>> >>> This is the last xHCI series I have. Can you please take a look and apply? >> >> I'd like to see some RB/TB from Stefan Roese first if possible. >> > > OK, if that's the case, can you send a pull request to Tom to get usb > in? So that I can apply Stefan's x86 patch series on top of this. (I > cannot send PR for x86 before the usb changes)
I actually cannot because the USB is currently broken, sorry, I'm waiting for a fix before I do that. Stefan, can you look at this series please? -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot