Hi Marek, On Fri, Jul 21, 2017 at 4:56 PM, Marek Vasut <ma...@denx.de> wrote: > On 07/21/2017 10:54 AM, Bin Meng wrote: >> Hi Marek, >> >> On Thu, Jul 20, 2017 at 8:20 PM, Marek Vasut <ma...@denx.de> wrote: >>> On 07/20/2017 02:16 PM, Bin Meng wrote: >>>> Hi Marek, >>>> >>>> On Thu, Jul 20, 2017 at 7:12 AM, Bin Meng <bmeng...@gmail.com> wrote: >>>>> This series is the final series of the xHCI driver update. >>>>> >>>>> This adds the missing interrupt transfer support to xHCI driver, so >>>>> that devices like USB keyboard that uses interrupt transfer when >>>>> CONFIG_SYS_USB_EVENT_POLL is defined can work. >>>>> >>>>> This also adds full speed device support. Unlike low/high/super speed >>>>> devices, full speed device may report its endpoint 0 max packet size >>>>> as 8/16/32/64. xHCI driver guesses 64 for the first attempt to get the >>>>> initial 8 bytes device descriptor, and later adjusts the context for >>>>> endpoint 0. >>>>> >>>>> This series also made several updates to xHCI driver to conform with >>>>> the spec. >>>>> >>>>> Previous two series: >>>>> [1]: usb: xhci: Fix USB xHCI support on Intel platform >>>>> https://lists.denx.de/pipermail/u-boot/2017-June/296166.html >>>>> [2]: usb: hub: Support USB 3.0 hubs >>>>> https://lists.denx.de/pipermail/u-boot/2017-June/296284.html >>>>> >>>>> This series is available at u-boot-x86/xhci-working3 for testing. >>>>> >>>>> Changes in v3: >>>>> - rebase on u-boot-usb/master >>>>> - add changes to poplar.h >>>>> >>>>> Bin Meng (13): >>>>> usb: xhci: Add interrupt transfer support >>>>> usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board >>>>> configs >>>>> usb: kbd: kconfig: Set a default polling mechanism for USB keyboard >>>>> usb: Only get 64 bytes device descriptor for full speed devices >>>>> usb: Read device descriptor after device is addressed for xHCI >>>>> usb: xhci: Fix max packet size for full speed device endpoint 0 >>>>> usb: hub: Clear port reset before usb_hub_port_connect_change() >>>>> usb: hub: Clear BH reset status change for a 3.0 hub >>>>> usb: Handle audio extension endpoint descriptor in usb_parse_config() >>>>> usb: xhci: Honor endpoint's interval >>>>> usb: xhci: Program max burst size for endpoint >>>>> usb: xhci: Set 'Error Count' to 0 for isoch endpoints >>>>> usb: xhci: Set 'Average TRB Length' to 8 for control endpoints >>>>> >>>> >>>> This is the last xHCI series I have. Can you please take a look and apply? >>> >>> I'd like to see some RB/TB from Stefan Roese first if possible. >>> >> >> OK, if that's the case, can you send a pull request to Tom to get usb >> in? So that I can apply Stefan's x86 patch series on top of this. (I >> cannot send PR for x86 before the usb changes) > > I actually cannot because the USB is currently broken, sorry, I'm > waiting for a fix before I do that. > > Stefan, can you look at this series please?
What "broken" issues are you seeing? Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
