在 2018-07-27五的 18:48 +0530，Jagan Teki写道： > On Thu, Jul 26, 2018 at 12:35 PM, Icenowy Zheng <icen...@aosc.io> > wrote: > > > > > > 于 2018年7月26日 GMT+08:00 下午3:02:50, Jagan Teki < > > ja...@amarulasolutions.com> 写到: > > > On Sat, Jul 21, 2018 at 1:50 PM, Icenowy Zheng <icen...@aosc.io> > > > wrote: > > > > This patchset trys to add support for Allwinner H6 SoC to U- > > > > Boot. > > > > > > > > Allwinner H6 is a quite new Allwinner SoC, with several parts > > > > changed > > > > > > a > > > > lot (memory map, DRAM controller, CCU, so on). The position > > > > which SPL > > > > will be loaded (SRAM A1) also changed to 0x20000. > > > > > > > > The Pine H64 board support comes with this patchset, as this is > > > > the > > > > first H6 board that I can get (being early bird). > > > > > > > > Icenowy Zheng (13): > > > > sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS > > > > sunxi: add basic memory map definitions of H6 SoC > > > > sunxi: change RMR64's RVBAR address for H6 > > > > sunxi: change ATF position for H6 > > > > sunxi: add config for SPL at 0x20000 on H6 > > > > sunxi: change GIC address on H6 > > > > sunxi: add clock code for H6 > > > > sunxi: use sun6i-style watchdog for H6 > > > > sunxi: add UART0 setup for H6 > > > > sunxi: add MMC support for H6 > > > > sunxi: add DRAM support to H6 > > > > sunxi: add support for Allwinner H6 SoC > > > > sunxi: add support for Pine H64 board > > Reviewed-by: Jagan Teki <ja...@openedev.com>
Do you consider merge it now? > > > > > > > Observing SPL hang during relocation switch to board_init_r with > > > orangepi board[1], will pine boot? look like both seem similar > > > LPDDR3 > > > configs atleast from schematics. > > > > Use v2.1 DRAM patch. > > Thanks. > > Tested-by: Jagan Teki <ja...@openedev.com> > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
