在 2018-07-31二的 11:30 +0530,Jagan Teki写道: > On Sat, Jul 21, 2018 at 1:50 PM, Icenowy Zheng <icen...@aosc.io> > wrote: > > This patchset trys to add support for Allwinner H6 SoC to U-Boot. > > > > Allwinner H6 is a quite new Allwinner SoC, with several parts > > changed a > > lot (memory map, DRAM controller, CCU, so on). The position which > > SPL > > will be loaded (SRAM A1) also changed to 0x20000. > > > > The Pine H64 board support comes with this patchset, as this is the > > first H6 board that I can get (being early bird). > > > > Icenowy Zheng (13): > > sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS > > sunxi: add basic memory map definitions of H6 SoC > > sunxi: change RMR64's RVBAR address for H6 > > sunxi: change ATF position for H6 > > sunxi: add config for SPL at 0x20000 on H6 > > sunxi: change GIC address on H6 > > sunxi: add clock code for H6 > > sunxi: use sun6i-style watchdog for H6 > > sunxi: add UART0 setup for H6 > > sunxi: add MMC support for H6 > > sunxi: add DRAM support to H6 > > Replaced with v2.1 [3] > > > sunxi: add support for Allwinner H6 SoC > > sunxi: add support for Pine H64 board > > Applied to u-boot-sunxi/master > > [3] https://patchwork.ozlabs.org/patch/947557/
I tried to build 89a897fc4d ("board: sun50i: h6: Add OrangePi One Plus initial support"), and with GCC 7.3.0 and binutils 2.3.0 I got "region `.sram' overflowed by 56 bytes". > > Jagan. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot