Use the DWC2 device driver with DM_USB_GADGET support and
cleanup the USB support in STM32MP1 board.
Signed-off-by: Patrick Delaunay <patrick.delau...@st.com>
---
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 3 +-
arch/arm/dts/stm32mp157a-dk1.dts | 16 ++-
arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi | 1 +
arch/arm/dts/stm32mp157c.dtsi | 2 +-
board/st/stm32mp1/stm32mp1.c | 165 +++----------------------------
configs/stm32mp15_basic_defconfig | 1 +
configs/stm32mp15_trusted_defconfig | 1 +
7 files changed, 32 insertions(+), 157 deletions(-)
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
index af7acfa..7e2c5d0 100644
--- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -11,6 +11,7 @@
aliases {
i2c3 = &i2c4;
mmc0 = &sdmmc1;
+ usb0 = &usbotg_hs;
};
config {
u-boot,boot-led = "heartbeat";
@@ -190,7 +191,7 @@
};
&usbotg_hs {
- usb1600;
+ force-b-session-valid;
hnp-srp-disable;
};
diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts
index 0882765..b8ef820 100644
--- a/arch/arm/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/dts/stm32mp157a-dk1.dts
@@ -249,11 +249,25 @@
status = "okay";
};
+&usbotg_hs {
+ dr_mode = "peripheral";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
&usbphyc {
- vdd3v3-supply = <&vdd_usb>;
status = "okay";
};
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
+
&vrefbuf {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
diff --git a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
index 6a18d03..6025b64 100644
--- a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
@@ -12,6 +12,7 @@
i2c4 = &i2c5;
pinctrl2 = &stmfx_pinctrl;
spi0 = &qspi;
+ usb0 = &usbotg_hs;
};
};
diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp157c.dtsi
index f1375a9..82177b5 100644
--- a/arch/arm/dts/stm32mp157c.dtsi
+++ b/arch/arm/dts/stm32mp157c.dtsi
@@ -825,7 +825,7 @@
};
usbotg_hs: usb-otg@49000000 {
- compatible = "snps,dwc2";
+ compatible = "st,stm32mp1-hsotg", "snps,dwc2";
reg = <0x49000000 0x10000>;
clocks = <&rcc USBO_K>;
clock-names = "otg";
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 9a68047..58b6d78 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -7,18 +7,17 @@
#include <config.h>
#include <clk.h>
#include <dm.h>
+#include <g_dnl.h>
#include <generic-phy.h>
#include <led.h>
#include <misc.h>
#include <phy.h>
#include <reset.h>
#include <syscon.h>
-#include <usb.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/stm32.h>
#include <power/regulator.h>
-#include <usb/dwc2_udc.h>
/* SYSCFG registers */
#define SYSCFG_BOOTR 0x00
@@ -58,11 +57,6 @@
*/
DECLARE_GLOBAL_DATA_PTR;
-#define STM32MP_GUSBCFG 0x40002407
-
-#define STM32MP_GGPIO 0x38
-#define STM32MP_GGPIO_VBUS_SENSING BIT(21)
-
#define USB_WARNING_LOW_THRESHOLD_UV 660000
#define USB_START_LOW_THRESHOLD_UV 1230000
#define USB_START_HIGH_THRESHOLD_UV 2100000
@@ -155,149 +149,22 @@ static void board_key_check(void)
#endif
}
-static struct dwc2_plat_otg_data stm32mp_otg_data = {
- .usb_gusbcfg = STM32MP_GUSBCFG,
-};
+#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
-static struct reset_ctl usbotg_reset;
-
-int board_usb_init(int index, enum usb_init_type init)
+int g_dnl_board_usb_cable_connected(void)
{
- struct fdtdec_phandle_args args;
- struct udevice *dev;
- const void *blob = gd->fdt_blob;
- struct clk clk;
- struct phy phy;
- int node;
- int phy_provider;
+ struct udevice *dwc2_udc_otg;
int ret;
- /* find the usb otg node */
- node = fdt_node_offset_by_compatible(blob, -1, "snps,dwc2");
- if (node < 0) {
- debug("Not found usb_otg device\n");
- return -ENODEV;
- }
-
- if (!fdtdec_get_is_enabled(blob, node)) {
- debug("stm32 usbotg is disabled in the device tree\n");
- return -ENODEV;
- }
-
- /* Enable clock */
- ret = fdtdec_parse_phandle_with_args(blob, node, "clocks",
- "#clock-cells", 0, 0, &args);
- if (ret) {
- debug("usbotg has no clocks defined in the device tree\n");
- return ret;
- }
-
- ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &dev);
- if (ret)
- return ret;
-
- if (args.args_count != 1) {
- debug("Can't find clock ID in the device tree\n");
- return -ENODATA;
- }
-
- clk.dev = dev;
- clk.id = args.args[0];
-
- ret = clk_enable(&clk);
- if (ret) {
- debug("Failed to enable usbotg clock\n");
- return ret;
- }
-
- /* Reset */
- ret = fdtdec_parse_phandle_with_args(blob, node, "resets",
- "#reset-cells", 0, 0, &args);
- if (ret) {
- debug("usbotg has no resets defined in the device tree\n");
- goto clk_err;
- }
-
- ret = uclass_get_device_by_of_offset(UCLASS_RESET, args.node, &dev);
- if (ret || args.args_count != 1)
- goto clk_err;
-
- usbotg_reset.dev = dev;
- usbotg_reset.id = args.args[0];
-
- reset_assert(&usbotg_reset);
- udelay(2);
- reset_deassert(&usbotg_reset);
-
- /* Get USB PHY */
- ret = fdtdec_parse_phandle_with_args(blob, node, "phys",
- "#phy-cells", 0, 0, &args);
- if (!ret) {
- phy_provider = fdt_parent_offset(blob, args.node);
- ret = uclass_get_device_by_of_offset(UCLASS_PHY,
- phy_provider, &dev);
- if (ret)
- goto clk_err;
-
- phy.dev = dev;
- phy.id = fdtdec_get_uint(blob, args.node, "reg", -1);
-
- ret = generic_phy_power_on(&phy);
- if (ret) {
- debug("unable to power on the phy\n");
- goto clk_err;
- }
-
- ret = generic_phy_init(&phy);
- if (ret) {
- debug("failed to init usb phy\n");
- goto phy_power_err;
- }
- }
-
- /* Parse and store data needed for gadget */
- stm32mp_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
- if (stm32mp_otg_data.regs_otg == FDT_ADDR_T_NONE) {
- debug("usbotg: can't get base address\n");
- ret = -ENODATA;
- goto phy_init_err;
- }
-
- stm32mp_otg_data.rx_fifo_sz = fdtdec_get_int(blob, node,
- "g-rx-fifo-size", 0);
- stm32mp_otg_data.np_tx_fifo_sz = fdtdec_get_int(blob, node,
- "g-np-tx-fifo-size", 0);
- stm32mp_otg_data.tx_fifo_sz = fdtdec_get_int(blob, node,
- "g-tx-fifo-size", 0);
- /* Enable voltage level detector */
- if (!(fdtdec_parse_phandle_with_args(blob, node, "usb33d-supply",
- NULL, 0, 0, &args))) {
- if (!uclass_get_device_by_of_offset(UCLASS_REGULATOR,
- args.node, &dev)) {
- ret = regulator_set_enable(dev, true);
- if (ret) {
- debug("Failed to enable usb33d\n");
- goto phy_init_err;
- }
- }
- }
- /* Enable vbus sensing */
- setbits_le32(stm32mp_otg_data.regs_otg + STM32MP_GGPIO,
- STM32MP_GGPIO_VBUS_SENSING);
-
- return dwc2_udc_probe(&stm32mp_otg_data);
-
-phy_init_err:
- generic_phy_exit(&phy);
-
-phy_power_err:
- generic_phy_power_off(&phy);
-
-clk_err:
- clk_disable(&clk);
+ ret = uclass_get_device_by_driver(UCLASS_USB_GADGET_GENERIC,
+ DM_GET_DRIVER(dwc2_udc_otg),
+ &dwc2_udc_otg);
+ if (!ret)
+ debug("dwc2_udc_otg init failed\n");
- return ret;
+ return dwc2_udc_B_session_valid(dwc2_udc_otg);
}
+#endif /* CONFIG_USB_GADGET */
static int get_led(struct udevice **dev, char *led_string)
{
@@ -438,16 +305,6 @@ static int board_check_usb_power(void)
return 0;
}
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
- /* Reset usbotg */
- reset_assert(&usbotg_reset);
- udelay(2);
- reset_deassert(&usbotg_reset);
-
- return 0;
-}
-
static void sysconf_init(void)
{
#ifndef CONFIG_STM32MP1_TRUSTED
diff --git a/configs/stm32mp15_basic_defconfig
b/configs/stm32mp15_basic_defconfig
index b6d994c..ff95dcd 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -71,6 +71,7 @@ CONFIG_SERIAL_RX_BUFFER=y
CONFIG_STM32_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_GADGET=y
diff --git a/configs/stm32mp15_trusted_defconfig
b/configs/stm32mp15_trusted_defconfig
index ed2a2e6..f82b770 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -60,6 +60,7 @@ CONFIG_SERIAL_RX_BUFFER=y
CONFIG_STM32_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_GADGET=y
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
