> From: Jack Mitchell <m...@embed.me.uk> > Sent: samedi 30 mars 2019 12:42 > > On 29/03/2019 14:42, Patrick Delaunay wrote: > > > > This patch-set created after Marek remarks on patch > > board: stm32mp1: Add tx_fifo_sz_array support > > http://patchwork.ozlabs.org/patch/1056452/ > > > > This serie convert the DWC2 to driver model and use it for the > > stm32mp1 boards. > > > > USB device and cable connection tested on EV1 and DK2. > > > > This serie superseded the Patrice patches: > > http://patchwork.ozlabs.org/project/uboot/list/?series=97121 > > > > Warning: the serie need to be apply after > > http://patchwork.ozlabs.org/project/uboot/list/?series=91422 > > http://patchwork.ozlabs.org/project/uboot/list/?series=91497 > > Hi Patrice, > > The second patch series doesn't apply cleanly anymore, could you rebase and > resend so I can test this series?
Hi, Yes, I have many pending series for the next releases on stm32mp1 arch and for the 2 baord ev1 and dk2. So many conflicts. I willl push a rebase this week, but you can use my downstream branch (based on v2019.04) with all the upstreamed patches, including the last one for USB; I have already solve the issues: https://github.com/patrickdelaunay/u-boot/tree/v2019.04-stm32mp > Regards, > Jack. Patrick > > > > > > > > Patrice Chotard (1): > > usb: dwc2_udc_otg: Add tx_fifo_sz array support > > > > Patrick Delaunay (15): > > phy: usbphyc: remove unused variable index > > phy: usbphyc: update xlate with DT binding > > phy: usbphyc: Binding update of vdda supply > > phy: usbphyc: move vdda1v1 and vdda1v8 in phy_init > > phy: usbphyc: increase PLL wait timeout > > usb: dwc2: remove unused variable regs_otg > > usb: dwc2: convert driver to DM_USB_GADGET > > usb: dwc2: force reset assert before to probe the driver > > usb: dwc2: Add force-b-session-valid support > > usb: dwc2: Add function for session B check > > usb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 register > > usb: dwc2: add support for STM32MP1 > > stm32mp1: remove CONFIG_USB_DWC2, HOST support for USBO > > stm32mp1: migrate USBOTG device to driver model > > stm32mp1: add stusb1600 support for DK1 and DK2 board > > > > arch/arm/dts/stm32mp157-pinctrl.dtsi | 7 + > > arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 3 +- > > arch/arm/dts/stm32mp157a-dk1.dts | 34 +- > > arch/arm/dts/stm32mp157c-ed1.dts | 8 - > > arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi | 1 + > > arch/arm/dts/stm32mp157c.dtsi | 5 +- > > board/st/stm32mp1/stm32mp1.c | 185 +++------- > > configs/stm32mp15_basic_defconfig | 2 +- > > configs/stm32mp15_trusted_defconfig | 2 +- > > doc/device-tree-bindings/phy/phy-stm32-usbphyc.txt | 4 +- > > doc/device-tree-bindings/usb/dwc2.txt | 58 +++ > > drivers/phy/phy-stm32-usbphyc.c | 111 +++--- > > drivers/usb/gadget/dwc2_udc_otg.c | 388 > ++++++++++++++++++++- > > drivers/usb/gadget/dwc2_udc_otg_priv.h | 1 - > > drivers/usb/gadget/dwc2_udc_otg_regs.h | 31 +- > > include/usb/dwc2_udc.h | 7 + > > 16 files changed, 627 insertions(+), 220 deletions(-) create mode > > 100644 doc/device-tree-bindings/usb/dwc2.txt > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot