Remove the HOST support for STM32MP1 USBO device = OTG DWC2. The current DWC2 driver have no dynamic detection of device, So it is dangerous to have start 3V3 when PC is connected to the micro USB connector.
=> it is preferable to have only DEVICE support CONFIG_USB_GADGET_DWC2_OTG for OTG port See DWC3 driver for clean dual role support... Signed-off-by: Patrick Delaunay <patrick.delau...@st.com> --- configs/stm32mp15_basic_defconfig | 1 - configs/stm32mp15_trusted_defconfig | 1 - 2 files changed, 2 deletions(-) diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index c54dcfa..b6d994c 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -73,7 +73,6 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y -CONFIG_USB_DWC2=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics" CONFIG_USB_GADGET_VENDOR_NUM=0x0483 diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index a050cee..ed2a2e6 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -62,7 +62,6 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y -CONFIG_USB_DWC2=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics" CONFIG_USB_GADGET_VENDOR_NUM=0x0483 -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
