This implements the Type-C PHY driver for Rockchip platform
with Cadence IP block.

Signed-off-by: Frank Wang <frank.w...@rock-chips.com>
Signed-off-by: William Wu <william...@rock-chips.com>
---
 drivers/phy/Kconfig                    |   6 +
 drivers/phy/Makefile                   |   1 +
 drivers/phy/phy-rockchip-typec.c       | 534 +++++++++++++++++++++++++
 include/linux/usb/rockchip_phy_typec.h |  52 +++
 4 files changed, 593 insertions(+)
 create mode 100644 drivers/phy/phy-rockchip-typec.c
 create mode 100644 include/linux/usb/rockchip_phy_typec.h

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index a72f34f0d4..c8472ef245 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -90,6 +90,12 @@ config PHY_DA8XX_USB
        help
          Enable this to support the USB PHY on DA8xx SoCs.
 
+config PHY_ROCKCHIP_TYPEC
+       bool "Support Rockchip TYPEC PHY Driver"
+       depends on PHY && ARCH_ROCKCHIP
+       help
+         Enable this to support the Rockchip USB Type-C PHY.
+
 config PIPE3_PHY
        bool "Support omap's PIPE3 PHY"
        depends on PHY && ARCH_OMAP2PLUS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 43ce62e08c..9ed721b1d5 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_AM654_PHY) += phy-ti-am654.o
 obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
 obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
 obj-$(CONFIG_PHY_RCAR_GEN3) += phy-rcar-gen3.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
 obj-$(CONFIG_PHY_STM32_USBPHYC) += phy-stm32-usbphyc.o
 obj-$(CONFIG_MESON_GXL_USB_PHY) += meson-gxl-usb2.o meson-gxl-usb3.o
 obj-$(CONFIG_MESON_G12A_USB_PHY) += meson-g12a-usb2.o meson-g12a-usb3-pcie.o
diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
new file mode 100644
index 0000000000..cd0f055bd4
--- /dev/null
+++ b/drivers/phy/phy-rockchip-typec.c
@@ -0,0 +1,534 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2020 Rockchip Electronics Co., Ltd
+ *
+ * Based on drivers/phy/rockchip/phy-rockchip-typec.c in Linux Kernel.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/lists.h>
+#include <dm/of_access.h>
+#include <generic-phy.h>
+#include <power/regulator.h>
+#include <regmap.h>
+#include <reset.h>
+#include <syscon.h>
+#include <asm-generic/io.h>
+#include <asm/arch/clock.h>
+#include <linux/iopoll.h>
+#include <linux/usb/rockchip_phy_typec.h>
+
+#define CMN_PLL0_VCOCAL_OVRD           (0x83 << 2)
+#define CMN_PLL0_VCOCAL_INIT           (0x84 << 2)
+#define CMN_PLL0_VCOCAL_ITER           (0x85 << 2)
+#define CMN_PLL0_LOCK_REFCNT_START     (0x90 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_START     (0x92 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_THR       (0x93 << 2)
+#define CMN_PLL0_INTDIV                        (0x94 << 2)
+#define CMN_PLL0_FRACDIV               (0x95 << 2)
+#define CMN_PLL0_HIGH_THR              (0x96 << 2)
+#define CMN_PLL0_DSM_DIAG              (0x97 << 2)
+#define CMN_PLL0_SS_CTRL1              (0x98 << 2)
+#define CMN_PLL0_SS_CTRL2              (0x99 << 2)
+#define CMN_DIAG_PLL0_FBH_OVRD         (0x1c0 << 2)
+#define CMN_DIAG_PLL0_FBL_OVRD         (0x1c1 << 2)
+#define CMN_DIAG_PLL0_OVRD             (0x1c2 << 2)
+#define CMN_DIAG_PLL0_V2I_TUNE         (0x1c5 << 2)
+#define CMN_DIAG_PLL0_CP_TUNE          (0x1c6 << 2)
+#define CMN_DIAG_PLL0_LF_PROG          (0x1c7 << 2)
+#define CMN_DIAG_HSCLK_SEL             (0x1e0 << 2)
+
+#define TX_TXCC_MGNFS_MULT_000(n)      ((0x4050 | ((n) << 9)) << 2)
+#define XCVR_DIAG_PLLDRC_CTRL(n)       ((0x40e0 | ((n) << 9)) << 2)
+#define XCVR_DIAG_BIDI_CTRL(n)         ((0x40e8 | ((n) << 9)) << 2)
+#define XCVR_DIAG_LANE_FCM_EN_MGN(n)   ((0x40f2 | ((n) << 9)) << 2)
+#define TX_PSC_A0(n)                   ((0x4100 | ((n) << 9)) << 2)
+#define TX_PSC_A1(n)                   ((0x4101 | ((n) << 9)) << 2)
+#define TX_PSC_A2(n)                   ((0x4102 | ((n) << 9)) << 2)
+#define TX_PSC_A3(n)                   ((0x4103 | ((n) << 9)) << 2)
+#define TX_RCVDET_CTRL(n)              ((0x4120 | ((n) << 9)) << 2)
+#define TX_RCVDET_EN_TMR(n)            ((0x4122 | ((n) << 9)) << 2)
+#define TX_RCVDET_ST_TMR(n)            ((0x4123 | ((n) << 9)) << 2)
+#define TX_DIAG_TX_DRV(n)              ((0x41e1 | ((n) << 9)) << 2)
+#define TX_DIAG_BGREF_PREDRV_DELAY     (0x41e7 << 2)
+
+#define RX_PSC_A0(n)                   ((0x8000 | ((n) << 9)) << 2)
+#define RX_PSC_A1(n)                   ((0x8001 | ((n) << 9)) << 2)
+#define RX_PSC_A2(n)                   ((0x8002 | ((n) << 9)) << 2)
+#define RX_PSC_A3(n)                   ((0x8003 | ((n) << 9)) << 2)
+#define RX_PSC_CAL(n)                  ((0x8006 | ((n) << 9)) << 2)
+#define RX_PSC_RDY(n)                  ((0x8007 | ((n) << 9)) << 2)
+#define RX_SIGDET_HL_FILT_TMR(n)       ((0x8090 | ((n) << 9)) << 2)
+#define RX_REE_CTRL_DATA_MASK(n)       ((0x81bb | ((n) << 9)) << 2)
+#define RX_DIAG_SIGDET_TUNE(n)         ((0x81dc | ((n) << 9)) << 2)
+#define RX_DIAG_SC2C_DELAY             (0x81e1 << 2)
+
+#define PHY_ISO_CMN_CTRL               (0xc010 << 2)
+#define PMA_CMN_CTRL1                  (0xc800 << 2)
+#define PHY_PMA_ISO_CMN_CTRL           (0xc810 << 2)
+#define PHY_ISOLATION_CTRL             (0xc81f << 2)
+#define PHY_PMA_ISO_XCVR_CTRL(n)       ((0xcc11 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_LINK_MODE(n)       ((0xcc12 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_PWRST_CTRL(n)      ((0xcc13 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_LO(n)      ((0xcc14 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_HI(n)      ((0xcc15 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_LO(n)      ((0xcc16 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_HI(n)      ((0xcc17 | ((n) << 6)) << 2)
+
+/*
+ * Selects which PLL clock will be driven on the analog high speed
+ * clock 0: PLL 0 div 1
+ * clock 1: PLL 1 div 2
+ */
+#define CLK_PLL1_DIV1                  0x20
+#define CLK_PLL1_DIV2                  0x30
+#define CLK_PLL_MASK                   0x33
+
+#define CMN_READY                      BIT(0)
+#define PHY_MODE_SET_TIMEOUT           100000
+#define MODE_DISCONNECT                        0
+#define MODE_UFP_USB                   BIT(0)
+#define MODE_DFP_USB                   BIT(1)
+#define POWER_ON_TRIES                 5
+
+struct phy_reg {
+       u16 value;
+       u32 addr;
+};
+
+static const struct phy_reg usb3_pll_cfg[] = {
+       { 0xf0,         CMN_PLL0_VCOCAL_INIT },
+       { 0x18,         CMN_PLL0_VCOCAL_ITER },
+       { 0xd0,         CMN_PLL0_INTDIV },
+       { 0x4a4a,       CMN_PLL0_FRACDIV },
+       { 0x34,         CMN_PLL0_HIGH_THR },
+       { 0x1ee,        CMN_PLL0_SS_CTRL1 },
+       { 0x7f03,       CMN_PLL0_SS_CTRL2 },
+       { 0x20,         CMN_PLL0_DSM_DIAG },
+       { 0,            CMN_DIAG_PLL0_OVRD },
+       { 0,            CMN_DIAG_PLL0_FBH_OVRD },
+       { 0,            CMN_DIAG_PLL0_FBL_OVRD },
+       { 0x7,          CMN_DIAG_PLL0_V2I_TUNE },
+       { 0x45,         CMN_DIAG_PLL0_CP_TUNE },
+       { 0x8,          CMN_DIAG_PLL0_LF_PROG },
+};
+
+static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy)
+{
+       u32 i, rdata;
+
+       /*
+        * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
+        * cmn_psm_clk_dig_div = 2, set the clk division to 2
+        */
+       writel(0x830, tcphy->base + PMA_CMN_CTRL1);
+       for (i = 0; i < 4; i++) {
+               /*
+                * The following PHY configuration assumes a 24 MHz reference
+                * clock.
+                */
+               writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
+               writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
+               writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
+       }
+
+       rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+       rdata &= ~CLK_PLL_MASK;
+       rdata |= CLK_PLL1_DIV2;
+       writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
+}
+
+static void tcphy_cfg_usb3_pll(struct rockchip_typec_phy *tcphy)
+{
+       u32 i;
+
+       /* load the configuration of PLL0 */
+       for (i = 0; i < ARRAY_SIZE(usb3_pll_cfg); i++)
+               writel(usb3_pll_cfg[i].value,
+                      tcphy->base + usb3_pll_cfg[i].addr);
+}
+
+static void tcphy_tx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+       writel(0x7799, tcphy->base + TX_PSC_A0(lane));
+       writel(0x7798, tcphy->base + TX_PSC_A1(lane));
+       writel(0x5098, tcphy->base + TX_PSC_A2(lane));
+       writel(0x5098, tcphy->base + TX_PSC_A3(lane));
+       writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+       writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_rx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+       writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
+       writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
+       writel(0xa410, tcphy->base + RX_PSC_A2(lane));
+       writel(0x2410, tcphy->base + RX_PSC_A3(lane));
+       writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
+       writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
+       writel(0x03e7, tcphy->base + RX_REE_CTRL_DATA_MASK(lane));
+       writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
+       writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
+       writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static inline int property_enable(struct rockchip_typec_phy *tcphy,
+                                 const struct usb3phy_reg *reg, bool en)
+{
+       u32 mask = 1 << reg->write_enable;
+       u32 val = en << reg->enable_bit;
+
+       return writel((val | mask), (tcphy->grf_regs + reg->offset));
+}
+
+static int tcphy_cfg_usb3_to_usb2_only(struct rockchip_typec_phy *tcphy,
+                                      bool value)
+{
+       struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+
+       property_enable(tcphy, &cfg->usb3tousb2_en, value);
+       property_enable(tcphy, &cfg->usb3host_disable, value);
+       property_enable(tcphy, &cfg->usb3host_port, !value);
+
+       return 0;
+}
+
+static int tcphy_phy_init(struct rockchip_typec_phy *tcphy)
+{
+       struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+       int ret;
+       u32 val;
+
+       reset_deassert(&tcphy->tcphy_rst);
+
+       property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+
+       tcphy_cfg_24m(tcphy);
+
+       tcphy_cfg_usb3_pll(tcphy);
+       if (tcphy->flip) {
+               tcphy_tx_usb3_cfg_lane(tcphy, 3);
+               tcphy_rx_usb3_cfg_lane(tcphy, 2);
+       } else {
+               tcphy_tx_usb3_cfg_lane(tcphy, 0);
+               tcphy_rx_usb3_cfg_lane(tcphy, 1);
+       }
+
+       reset_deassert(&tcphy->uphy_rst);
+
+       ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1,
+                                val, val & CMN_READY, PHY_MODE_SET_TIMEOUT);
+       if (ret < 0) {
+               dev_err(tcphy->dev, "wait pma ready timeout\n");
+               ret = -ETIMEDOUT;
+               goto err_wait_pma;
+       }
+
+       reset_deassert(&tcphy->pipe_rst);
+
+       return 0;
+
+err_wait_pma:
+       reset_assert(&tcphy->uphy_rst);
+       reset_assert(&tcphy->tcphy_rst);
+       return ret;
+}
+
+static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
+{
+       reset_assert(&tcphy->tcphy_rst);
+       reset_assert(&tcphy->uphy_rst);
+       reset_assert(&tcphy->pipe_rst);
+}
+
+static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
+{
+       u8 mode = MODE_DFP_USB | MODE_UFP_USB;
+
+       tcphy->flip = 0;
+
+       return mode;
+}
+
+static int _rockchip_usb3_phy_power_on(struct rockchip_typec_phy *tcphy)
+{
+       struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+       const struct usb3phy_reg *reg = &cfg->pipe_status;
+       int timeout, new_mode, ret = 0;
+       u32 val;
+
+       mutex_lock(&tcphy->lock);
+
+       new_mode = tcphy_get_mode(tcphy);
+
+       if (tcphy->mode == new_mode)
+               goto unlock_ret;
+
+       if (tcphy->mode == MODE_DISCONNECT) {
+               ret = tcphy_phy_init(tcphy);
+               if (ret)
+                       goto unlock_ret;
+       }
+
+       /* wait TCPHY for pipe ready */
+       for (timeout = 0; timeout < 100; timeout++) {
+               val = readl(tcphy->grf_regs + reg->offset);
+               if (!(val & BIT(reg->enable_bit))) {
+                       tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB);
+
+                       /* enable usb3 host */
+                       tcphy_cfg_usb3_to_usb2_only(tcphy, false);
+                       goto unlock_ret;
+               }
+               udelay(20);
+       }
+
+       if (tcphy->mode == MODE_DISCONNECT)
+               tcphy_phy_deinit(tcphy);
+
+       ret = -ETIMEDOUT;
+
+unlock_ret:
+       mutex_unlock(&tcphy->lock);
+       return ret;
+}
+
+static int rockchip_usb3_phy_power_on(struct phy *phy)
+{
+       struct udevice *parent = dev_get_parent(phy->dev);
+       struct rockchip_typec_phy *tcphy = dev_get_priv(parent);
+       int ret;
+       int tries;
+
+       for (tries = 0; tries < POWER_ON_TRIES; tries++) {
+               ret = _rockchip_usb3_phy_power_on(tcphy);
+               if (!ret)
+                       break;
+       }
+
+       if (tries && !ret)
+               dev_err(tcphy->dev, "Needed %d loops to turn on\n", tries);
+
+       return ret;
+}
+
+static int rockchip_usb3_phy_power_off(struct phy *phy)
+{
+       struct udevice *parent = dev_get_parent(phy->dev);
+       struct rockchip_typec_phy *tcphy = dev_get_priv(parent);
+
+       mutex_lock(&tcphy->lock);
+
+       if (tcphy->mode == MODE_DISCONNECT)
+               goto unlock;
+
+       tcphy->mode = MODE_DISCONNECT;
+       tcphy_phy_deinit(tcphy);
+
+unlock:
+       mutex_unlock(&tcphy->lock);
+       return 0;
+}
+
+static const struct phy_ops rockchip_usb3_phy_ops = {
+       .power_on       = rockchip_usb3_phy_power_on,
+       .power_off      = rockchip_usb3_phy_power_off,
+};
+
+int rockchip_u3phy_uboot_init(const char *name)
+{
+       struct udevice *udev;
+       struct rockchip_typec_phy *tcphy;
+       int tries;
+       int ret;
+
+       ret = uclass_get_device_by_name(UCLASS_PHY, name, &udev);
+       if (ret) {
+               pr_err("%s: get usb3-phy failed: %d\n", __func__, ret);
+               return ret;
+       }
+
+       /* Initialize OTG PHY */
+       tcphy = dev_get_priv(udev);
+       for (tries = 0; tries < POWER_ON_TRIES; tries++) {
+               ret = _rockchip_usb3_phy_power_on(tcphy);
+               if (!ret)
+                       break;
+       }
+
+       if (tries && !ret)
+               pr_err("%s: needed %d loops to turn on\n", __func__, tries);
+
+       return ret;
+}
+
+static int tcphy_get_param(struct udevice *dev,
+                          struct usb3phy_reg *reg,
+                          const char *name)
+{
+       u32 buffer[3];
+       int ret;
+
+       ret = dev_read_u32_array(dev, name, buffer, 3);
+       if (ret) {
+               pr_err("%s: Can not parse %s\n", __func__, name);
+               return ret;
+       }
+
+       reg->offset = buffer[0];
+       reg->enable_bit = buffer[1];
+       reg->write_enable = buffer[2];
+
+       return 0;
+}
+
+static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
+                         struct udevice *dev)
+{
+       struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+       int ret;
+
+       ret = tcphy_get_param(dev, &cfg->typec_conn_dir,
+                             "rockchip,typec-conn-dir");
+       if (ret)
+               return ret;
+
+       ret = tcphy_get_param(dev, &cfg->usb3tousb2_en,
+                             "rockchip,usb3tousb2-en");
+       if (ret)
+               return ret;
+
+       ret = tcphy_get_param(dev, &cfg->usb3host_disable,
+                             "rockchip,usb3-host-disable");
+       if (ret)
+               return ret;
+
+       ret = tcphy_get_param(dev, &cfg->usb3host_port,
+                             "rockchip,usb3-host-port");
+       if (ret)
+               return ret;
+
+       ret = tcphy_get_param(dev, &cfg->external_psm,
+                             "rockchip,external-psm");
+       if (ret)
+               return ret;
+
+       ret = tcphy_get_param(dev, &cfg->pipe_status,
+                             "rockchip,pipe-status");
+       if (ret)
+               return ret;
+
+       tcphy->grf_regs = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+       if (IS_ERR(tcphy->grf_regs)) {
+               dev_err(dev, "could not find grf dt node\n");
+               return PTR_ERR(tcphy->grf_regs);
+       }
+
+       ret = reset_get_by_name(dev, "uphy", &tcphy->uphy_rst);
+       if (ret) {
+               dev_err(dev, "no uphy_rst reset control found\n");
+               return ret;
+       }
+
+       ret = reset_get_by_name(dev, "uphy-pipe", &tcphy->pipe_rst);
+       if (ret) {
+               dev_err(dev, "no pipe_rst reset control found\n");
+               return ret;
+       }
+
+       ret = reset_get_by_name(dev, "uphy-pipe", &tcphy->tcphy_rst);
+       if (ret) {
+               dev_err(dev, "no tcphy_rst reset control found\n");
+               return ret;
+       }
+
+       return 0;
+}
+
+static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy)
+{
+       struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+
+       reset_assert(&tcphy->tcphy_rst);
+       reset_assert(&tcphy->uphy_rst);
+       reset_assert(&tcphy->pipe_rst);
+
+       /* select external psm clock */
+       property_enable(tcphy, &cfg->external_psm, 1);
+       property_enable(tcphy, &cfg->usb3tousb2_en, 0);
+
+       tcphy->mode = MODE_DISCONNECT;
+}
+
+static int rockchip_typec_phy_bind(struct udevice *parent)
+{
+       struct udevice *dev;
+       ofnode node;
+       const char *name;
+       int ret;
+
+       dev_for_each_subnode(node, parent) {
+               if (!ofnode_valid(node)) {
+                       debug("%s: %s subnode not found", __func__, 
parent->name);
+                       return -ENXIO;
+               }
+
+               name = ofnode_get_name(node);
+               debug("%s: subnode %s\n", __func__, name);
+
+               if (!strcasecmp(name, "usb3-port")) {
+                       ret = device_bind_driver_to_node(parent, 
"rockchip_typec_phy_port",
+                                                        name, node, &dev);
+                       if (ret) {
+                               pr_err("%s: '%s' cannot bind 
'rockchip_typec_phy_port'\n",
+                                      __func__, name);
+                               return ret;
+                       }
+               }
+       }
+
+       return 0;
+}
+
+static int rockchip_typec_phy_probe(struct udevice *udev)
+{
+       struct rockchip_typec_phy *tcphy = dev_get_priv(udev);
+       int ret;
+
+       tcphy->base = (void __iomem *)dev_read_addr(udev);
+       if (IS_ERR(tcphy->base))
+               return PTR_ERR(tcphy->base);
+
+       ret = tcphy_parse_dt(tcphy, udev);
+       if (ret)
+               return ret;
+
+       tcphy->dev = udev;
+       mutex_init(&tcphy->lock);
+
+       typec_phy_pre_init(tcphy);
+
+       printf("Rockchip Type-C PHY is initialized\n");
+       return 0;
+}
+
+static const struct udevice_id rockchip_typec_phy_dt_ids[] = {
+       { .compatible = "rockchip,rk3399-typec-phy" },
+       {}
+};
+
+U_BOOT_DRIVER(rockchip_typec_phy_port) = {
+       .name           = "rockchip_typec_phy_port",
+       .id             = UCLASS_PHY,
+       .ops            = &rockchip_usb3_phy_ops,
+};
+
+U_BOOT_DRIVER(rockchip_typec_phy) = {
+       .name           = "rockchip_typec_phy",
+       .id             = UCLASS_PHY,
+       .of_match       = rockchip_typec_phy_dt_ids,
+       .probe          = rockchip_typec_phy_probe,
+       .bind           = rockchip_typec_phy_bind,
+       .priv_auto_alloc_size = sizeof(struct rockchip_typec_phy),
+};
diff --git a/include/linux/usb/rockchip_phy_typec.h 
b/include/linux/usb/rockchip_phy_typec.h
new file mode 100644
index 0000000000..9551f2be1e
--- /dev/null
+++ b/include/linux/usb/rockchip_phy_typec.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Rockchip Electronics Co., Ltd
+ *
+ * Based on include/soc/rockchip/rockchip_phy_typec.h in Linux Kernel.
+ */
+
+#ifndef __LINUX_ROCKCHIP_PHY_TYPEC_H
+#define __LINUX_ROCKCHIP_PHY_TYPEC_H
+
+#include <reset.h>
+
+struct usb3phy_reg {
+       u32 offset;
+       u32 enable_bit;
+       u32 write_enable;
+};
+
+struct rockchip_usb3phy_port_cfg {
+       struct usb3phy_reg typec_conn_dir;
+       struct usb3phy_reg usb3tousb2_en;
+       struct usb3phy_reg usb3host_disable;
+       struct usb3phy_reg usb3host_port;
+       struct usb3phy_reg external_psm;
+       struct usb3phy_reg pipe_status;
+};
+
+struct rockchip_typec_phy {
+       struct udevice *dev;
+       void __iomem *base;
+       void __iomem *grf_regs;
+       struct reset_ctl uphy_rst;
+       struct reset_ctl pipe_rst;
+       struct reset_ctl tcphy_rst;
+       struct rockchip_usb3phy_port_cfg port_cfgs;
+       /* mutex to protect access to individual PHYs */
+       struct mutex lock;
+
+       bool flip;
+       u8 mode;
+};
+
+#if CONFIG_IS_ENABLED(PHY_ROCKCHIP_TYPEC)
+int rockchip_u3phy_uboot_init(const char *name);
+#else
+static inline int rockchip_u3phy_uboot_init(const char *name)
+{
+       return -ENOTSUPP;
+}
+#endif
+
+#endif /* __LINUX_ROCKCHIP_PHY_TYPEC_H */
-- 
2.17.1



Reply via email to