On Tue, Jun 16, 2020 at 5:51 PM Tom Rini <tr...@konsulko.com> wrote:
> Ah. So this is probably why the DT being right isn't helping then. If
> you want to blind-convert I'm happy to test, otherwise do you have a
> similar board conversion for me to look at? Thanks!
Please try Vladimir's suggestion as it seems to be the less intrusive approach:
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -321,7 +321,7 @@ int board_eth_init(bd_t *bis)
if (!bus)
return -EINVAL;
- phydev = phy_find_by_mask(bus, ETH_PHY_MASK, PHY_INTERFACE_MODE_RGMII);
+ phydev = phy_find_by_mask(bus, ETH_PHY_MASK,
PHY_INTERFACE_MODE_RGMII_ID);
if (!phydev) {
ret = -EINVAL;
goto free_bus;
Here is a similar DM_ETH board conversion:
commit 02ee7a4aa57b37d6003263b69b1852c4cda5975e
Author: Alifer Moraes <alifer.w...@gmail.com>
Date: Mon Feb 10 11:28:01 2020 -0300
mx6sabresd: Convert ethernet to driver model
Convert imx6sabresd ethernet to driver model to fix the following warning:
===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================
Signed-off-by: Alifer Moraes <alifer.w...@gmail.com>
Reviewed-by: Fabio Estevam <feste...@gmail.com>
Let us know if this helps.
