Hi Neil, On Wed, 1 Jul 2020 at 13:22, Neil Armstrong <narmstr...@baylibre.com> wrote: > > Hi, > > On 30/06/2020 18:02, Anand Moon wrote: > > Hi Neil, > > > > On Tue, 30 Jun 2020 at 18:30, Neil Armstrong <narmstr...@baylibre.com> > > wrote: > >> > >> Hi, > >> > >> On 30/06/2020 13:33, Anand Moon wrote: > >>> Hi Beniamino, > >>> > >>> On Wed, 6 May 2020 at 01:53, Beniamino Galvani <b.galv...@gmail.com> > >>> wrote: > >>>> > >>>> Hi, > >>>> > >>>> these two patches add initial u-boot support for Hardkernel ODROID-C4. > >>>> > >>>> https://wiki.odroid.com/odroid-c4/odroid-c4 > >>>> > >>>> Beniamino Galvani (2): > >>>> arm: dts: import ODROID-C4 device tree > >>>> boards: amlogic: add ODROID-C4 support > >>>> > >>> > >>> Can you respin this patches, I would like to see these get merged in > >>> the current u-boot release > >>> > >>> -Anand > >>> > >> > >> The Odroid-C4 could re-use the new Odroid-N2 board support I submitted at > >> [1] > >> > >> Anand, is the MAC address stored stored the same way on the C4 ? > >> > >> Neil > >> > >> [1] > >> https://patchwork.ozlabs.org/project/uboot/patch/20200618144037.23392-1-narmstr...@baylibre.com/ > > > > I gave this patches a try on latest u-boot but I cannot make my Odroid > > C4 to boot up uinsg microSD card and eMMC > > Here are the logs. > > The PHY config must be wrong and it misses the -u-boot.dtsi to enable HDMI. > > Can you test my custodian test branch with my C4 support patchset ? > > https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/-/tree/u-boot-amlogic-test > > This one is used in Armbian 5.4 release and our KernelCI lab. > > Neil >
Thanks. There seems to be a typo in the build instructions in # doc/board/amlogic/odroid-c4.rst instead of *g12b*, it should be *g12a* See below I get following build warning, which I fix locally, ./buildc4c.sh: line 78: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory ./buildc4c.sh: line 81: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory ./buildc4c.sh: line 84: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory ./buildc4c.sh: line 87: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory ./buildc4c.sh: line 90: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory ./buildc4c.sh: line 92: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory After that fix I am able to boot my board using eMMC and microSD card. -Anand