Hi Neil, On Wed, 1 Jul 2020 at 18:38, Neil Armstrong <narmstr...@baylibre.com> wrote: > > Hi, > > On 01/07/2020 13:31, Anand Moon wrote: > > Hi Neil, > > > > On Wed, 1 Jul 2020 at 13:22, Neil Armstrong <narmstr...@baylibre.com> wrote: > >> > >> Hi, > >> > >> On 30/06/2020 18:02, Anand Moon wrote: > >>> Hi Neil, > >>> > >>> On Tue, 30 Jun 2020 at 18:30, Neil Armstrong <narmstr...@baylibre.com> > >>> wrote: > >>>> > >>>> Hi, > >>>> > >>>> On 30/06/2020 13:33, Anand Moon wrote: > >>>>> Hi Beniamino, > >>>>> > >>>>> On Wed, 6 May 2020 at 01:53, Beniamino Galvani <b.galv...@gmail.com> > >>>>> wrote: > >>>>>> > >>>>>> Hi, > >>>>>> > >>>>>> these two patches add initial u-boot support for Hardkernel ODROID-C4. > >>>>>> > >>>>>> https://wiki.odroid.com/odroid-c4/odroid-c4 > >>>>>> > >>>>>> Beniamino Galvani (2): > >>>>>> arm: dts: import ODROID-C4 device tree > >>>>>> boards: amlogic: add ODROID-C4 support > >>>>>> > >>>>> > >>>>> Can you respin this patches, I would like to see these get merged in > >>>>> the current u-boot release > >>>>> > >>>>> -Anand > >>>>> > >>>> > >>>> The Odroid-C4 could re-use the new Odroid-N2 board support I submitted > >>>> at [1] > >>>> > >>>> Anand, is the MAC address stored stored the same way on the C4 ? > >>>> > >>>> Neil > >>>> > >>>> [1] > >>>> https://patchwork.ozlabs.org/project/uboot/patch/20200618144037.23392-1-narmstr...@baylibre.com/ > >>> > >>> I gave this patches a try on latest u-boot but I cannot make my Odroid > >>> C4 to boot up uinsg microSD card and eMMC > >>> Here are the logs. > >> > >> The PHY config must be wrong and it misses the -u-boot.dtsi to enable HDMI. > >> > >> Can you test my custodian test branch with my C4 support patchset ? > >> > >> https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/-/tree/u-boot-amlogic-test > >> > >> This one is used in Armbian 5.4 release and our KernelCI lab. > >> > >> Neil > >> > > > > Thanks. > > > > There seems to be a typo in the build instructions in # > > doc/board/amlogic/odroid-c4.rst > > instead of *g12b*, it should be *g12a* > > > > See below I get following build warning, which I fix locally, > > > > ./buildc4c.sh: line 78: > > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > > No such file or directory > > ./buildc4c.sh: line 81: > > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > > No such file or directory > > ./buildc4c.sh: line 84: > > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > > No such file or directory > > ./buildc4c.sh: line 87: > > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > > No such file or directory > > ./buildc4c.sh: line 90: > > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > > No such file or directory > > ./buildc4c.sh: line 92: > > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > > No such file or directory > > > > After that fix I am able to boot my board using eMMC and microSD card. > > Thanks for testing, I'll push my serie rebased on v5.8-rc1 and fix this typo. > > Neil >
Thanks, I see the same issue with random mac address just like N2. -Anand