Hi, On 01/07/2020 13:31, Anand Moon wrote: > Hi Neil, > > On Wed, 1 Jul 2020 at 13:22, Neil Armstrong <narmstr...@baylibre.com> wrote: >> >> Hi, >> >> On 30/06/2020 18:02, Anand Moon wrote: >>> Hi Neil, >>> >>> On Tue, 30 Jun 2020 at 18:30, Neil Armstrong <narmstr...@baylibre.com> >>> wrote: >>>> >>>> Hi, >>>> >>>> On 30/06/2020 13:33, Anand Moon wrote: >>>>> Hi Beniamino, >>>>> >>>>> On Wed, 6 May 2020 at 01:53, Beniamino Galvani <b.galv...@gmail.com> >>>>> wrote: >>>>>> >>>>>> Hi, >>>>>> >>>>>> these two patches add initial u-boot support for Hardkernel ODROID-C4. >>>>>> >>>>>> https://wiki.odroid.com/odroid-c4/odroid-c4 >>>>>> >>>>>> Beniamino Galvani (2): >>>>>> arm: dts: import ODROID-C4 device tree >>>>>> boards: amlogic: add ODROID-C4 support >>>>>> >>>>> >>>>> Can you respin this patches, I would like to see these get merged in >>>>> the current u-boot release >>>>> >>>>> -Anand >>>>> >>>> >>>> The Odroid-C4 could re-use the new Odroid-N2 board support I submitted at >>>> [1] >>>> >>>> Anand, is the MAC address stored stored the same way on the C4 ? >>>> >>>> Neil >>>> >>>> [1] >>>> https://patchwork.ozlabs.org/project/uboot/patch/20200618144037.23392-1-narmstr...@baylibre.com/ >>> >>> I gave this patches a try on latest u-boot but I cannot make my Odroid >>> C4 to boot up uinsg microSD card and eMMC >>> Here are the logs. >> >> The PHY config must be wrong and it misses the -u-boot.dtsi to enable HDMI. >> >> Can you test my custodian test branch with my C4 support patchset ? >> >> https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/-/tree/u-boot-amlogic-test >> >> This one is used in Armbian 5.4 release and our KernelCI lab. >> >> Neil >> > > Thanks. > > There seems to be a typo in the build instructions in # > doc/board/amlogic/odroid-c4.rst > instead of *g12b*, it should be *g12a* > > See below I get following build warning, which I fix locally, > > ./buildc4c.sh: line 78: > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > No such file or directory > ./buildc4c.sh: line 81: > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > No such file or directory > ./buildc4c.sh: line 84: > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > No such file or directory > ./buildc4c.sh: line 87: > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > No such file or directory > ./buildc4c.sh: line 90: > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > No such file or directory > ./buildc4c.sh: line 92: > /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: > No such file or directory > > After that fix I am able to boot my board using eMMC and microSD card.
Thanks for testing, I'll push my serie rebased on v5.8-rc1 and fix this typo. Neil > > -Anand >