[ fsl_esdhc commit da86e8cfcb03ed5c1d8e0718bc8bc8583e60ced8 ]

SDMA can only do DMA with 32 bit addresses. This is true for all
architectures (just doesn't apply to 32 bit ones). Simplify the code and
remove unnecessary CONFIG_FSL_LAYERSCAPE.

Also make the error message more concise.

Signed-off-by: Michael Walle <mich...@walle.cc>
Signed-off-by: Sean Anderson <sean.ander...@seco.com>
Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com>
---

(no changes since v1)

 drivers/mmc/fsl_esdhc_imx.c | 33 ++++++---------------------------
 1 file changed, 6 insertions(+), 27 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index 72f3eec205..84df131c9f 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -282,10 +282,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, 
struct mmc *mmc,
 {
        int timeout;
        struct fsl_esdhc *regs = priv->esdhc_regs;
-#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) 
|| \
-       defined(CONFIG_IMX8ULP)
        dma_addr_t addr;
-#endif
        uint wml_value;
 
        wml_value = data->blocksize/4;
@@ -296,16 +293,10 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, 
struct mmc *mmc,
 
                esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) 
|| \
-       defined(CONFIG_IMX8ULP)
                addr = virt_to_phys((void *)(data->dest));
                if (upper_32_bits(addr))
-                       printf("Error found for upper 32 bits\n");
-               else
-                       esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
-#else
-               esdhc_write32(&regs->dsaddr, (u32)data->dest);
-#endif
+                       printf("Cannot use 64 bit addresses with SDMA\n");
+               esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
 #endif
        } else {
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
@@ -334,16 +325,10 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, 
struct mmc *mmc,
                esdhc_clrsetbits32(&regs->wml, WML_WR_WML_MASK,
                                        wml_value << 16);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) 
|| \
-               defined(CONFIG_IMX8ULP)
                addr = virt_to_phys((void *)(data->src));
                if (upper_32_bits(addr))
-                       printf("Error found for upper 32 bits\n");
-               else
-                       esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
-#else
-               esdhc_write32(&regs->dsaddr, (u32)data->src);
-#endif
+                       printf("Cannot use 64 bit addresses with SDMA\n");
+               esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
 #endif
        }
 
@@ -400,18 +385,12 @@ static void check_and_invalidate_dcache_range
        unsigned end = 0;
        unsigned size = roundup(ARCH_DMA_MINALIGN,
                                data->blocks*data->blocksize);
-#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) 
|| \
-       defined(CONFIG_IMX8ULP)
        dma_addr_t addr;
 
        addr = virt_to_phys((void *)(data->dest));
        if (upper_32_bits(addr))
-               printf("Error found for upper 32 bits\n");
-       else
-               start = lower_32_bits(addr);
-#else
-       start = (unsigned)data->dest;
-#endif
+               printf("Cannot use 64 bit addresses with SDMA\n");
+       start = lower_32_bits(addr);
        end = start + size;
        invalidate_dcache_range(start, end);
 }
-- 
2.25.1

Reply via email to