Hello Tim,
> -----Original Message-----
> From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Tim Harvey
> Sent: Tuesday, January 4, 2022 11:48 PM
> To: u-boot <u-boot@lists.denx.de>; Stefano Babic <sba...@denx.de>; Fabio
> Estevam
> <feste...@gmail.com>
> Cc: Schrempf Frieder <frieder.schre...@kontron.de>; Adam Ford
> <aford...@gmail.com>; Marcel Ziswiler <mar...@ziswiler.com>; Jagan Teki
> <ja...@amarulasolutions.com>
> Subject: mkimage_fit_atf.sh: not found
>
> Stefano and Fabio,
>
> I'm seeing the imx8mm_venice_defconfig target failing to build on
> master due to mkimage_fit_atf.sh not found:
> ./"arch/arm/mach-imx/mkimage_fit_atf.sh" \
> arch/arm/dts/imx8mm-venice-gw71xx-0x.dtb
> arch/arm/dts/imx8mm-venice-gw72xx-0x.dtb
> arch/arm/dts/imx8mm-venice-gw73xx-0x.dtb
> arch/arm/dts/imx8mm-venice-gw7901.dtb
> arch/arm/dts/imx8mm-venice-gw7902.dtb > u-boot.its
> /bin/sh: 1: ./arch/arm/mach-imx/mkimage_fit_atf.sh: not found
>
This has been dropped in d9a6f0eed6 ("tree: imx: remove old fit generator
script")
> As far as I can tell the other boards that are still using
> SPL_FIT_GENERATOR also fail due to this (ie imx8mm_beacon_defconfig,
> imx8mq_evk_defconfig, imx8mm-icore-mx8mm-edimm2.2_defconfig, etc).
imx8mq_evk is already converted and I've sent a patch for it, see [1].
>
> What is the state of the binman conversion? I submitted a series to
> convert my boards to binman and it has just been sitting without any
> response for months now [1].
I believe that the reason for your series sitting in the queue is the same as
for imx8mq_evk: missing binary blobs (ATF and DDR) are failing CI builds.
>
> I'm not sure when the above breakage occurred but the conversion to
> binman resolves it and other things.
>
> Please let me know what you expect me to do to resolve this as there
> is a release pending.
>
> Best regards,
>
> Tim
> [1] https://patchwork.ozlabs.org/project/uboot/patch/20211006201700.3018-1-
> thar...@gateworks.com/
-- andrey
Link: [1]:
http://patchwork.ozlabs.org/project/uboot/patch/20211203161802.12699-1-andrey.zhizhi...@leica-geosystems.com/
