On Tue, Jan 04, 2022 at 07:54:38PM -0300, Fabio Estevam wrote: > HI Tim, > > On Tue, Jan 4, 2022 at 7:48 PM Tim Harvey <thar...@gateworks.com> wrote: > > > > Stefano and Fabio, > > > > I'm seeing the imx8mm_venice_defconfig target failing to build on > > master due to mkimage_fit_atf.sh not found: > > ./"arch/arm/mach-imx/mkimage_fit_atf.sh" \ > > arch/arm/dts/imx8mm-venice-gw71xx-0x.dtb > > arch/arm/dts/imx8mm-venice-gw72xx-0x.dtb > > arch/arm/dts/imx8mm-venice-gw73xx-0x.dtb > > arch/arm/dts/imx8mm-venice-gw7901.dtb > > arch/arm/dts/imx8mm-venice-gw7902.dtb > u-boot.its > > /bin/sh: 1: ./arch/arm/mach-imx/mkimage_fit_atf.sh: not found > > > > As far as I can tell the other boards that are still using > > SPL_FIT_GENERATOR also fail due to this (ie imx8mm_beacon_defconfig, > > imx8mq_evk_defconfig, imx8mm-icore-mx8mm-edimm2.2_defconfig, etc). > > > > What is the state of the binman conversion? I submitted a series to > > convert my boards to binman and it has just been sitting without any > > response for months now [1]. > > > > I'm not sure when the above breakage occurred but the conversion to > > binman resolves it and other things. > > > > Please let me know what you expect me to do to resolve this as there > > is a release pending. > > > > Best regards, > > > > Tim > > [1] > > https://patchwork.ozlabs.org/project/uboot/patch/20211006201700.3018-1-thar...@gateworks.com/ > > Stefano is on vacation. Tom, would you mind picking Tim's series?
Looking at the thread, there's a few pre-requisite patches? And is this also one of the "switch to binman" patches that then fails in CI? Thanks. -- Tom
signature.asc
Description: PGP signature
