On Wed, Jan 5, 2022 at 3:34 AM ZHIZHIKIN Andrey <andrey.zhizhi...@leica-geosystems.com> wrote: > > Hello Tim, > > > -----Original Message----- > > From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Tim Harvey > > Sent: Tuesday, January 4, 2022 11:48 PM > > To: u-boot <u-boot@lists.denx.de>; Stefano Babic <sba...@denx.de>; Fabio > > Estevam > > <feste...@gmail.com> > > Cc: Schrempf Frieder <frieder.schre...@kontron.de>; Adam Ford > > <aford...@gmail.com>; Marcel Ziswiler <mar...@ziswiler.com>; Jagan Teki > > <ja...@amarulasolutions.com> > > Subject: mkimage_fit_atf.sh: not found > > > > Stefano and Fabio, > > > > I'm seeing the imx8mm_venice_defconfig target failing to build on > > master due to mkimage_fit_atf.sh not found: > > ./"arch/arm/mach-imx/mkimage_fit_atf.sh" \ > > arch/arm/dts/imx8mm-venice-gw71xx-0x.dtb > > arch/arm/dts/imx8mm-venice-gw72xx-0x.dtb > > arch/arm/dts/imx8mm-venice-gw73xx-0x.dtb > > arch/arm/dts/imx8mm-venice-gw7901.dtb > > arch/arm/dts/imx8mm-venice-gw7902.dtb > u-boot.its > > /bin/sh: 1: ./arch/arm/mach-imx/mkimage_fit_atf.sh: not found > > > > This has been dropped in d9a6f0eed6 ("tree: imx: remove old fit generator > script")
So why was that merged when it breaks several boards that are not switched to binman because of the CI issue? > > > As far as I can tell the other boards that are still using > > SPL_FIT_GENERATOR also fail due to this (ie imx8mm_beacon_defconfig, > > imx8mq_evk_defconfig, imx8mm-icore-mx8mm-edimm2.2_defconfig, etc). > > imx8mq_evk is already converted and I've sent a patch for it, see [1]. > > > > > What is the state of the binman conversion? I submitted a series to > > convert my boards to binman and it has just been sitting without any > > response for months now [1]. > > I believe that the reason for your series sitting in the queue is the same as > for imx8mq_evk: missing binary blobs (ATF and DDR) are failing CI builds. > Right, so imx8mq_evk (and others) are completely broken for the pending release correct? Sounds like we need to revert d9a6f0eed6 ("tree: imx: remove old fit generator script") Tim > > > > I'm not sure when the above breakage occurred but the conversion to > > binman resolves it and other things. > > > > Please let me know what you expect me to do to resolve this as there > > is a release pending. > > > > Best regards, > > > > Tim > > [1] https://patchwork.ozlabs.org/project/uboot/patch/20211006201700.3018-1- > > thar...@gateworks.com/ > > -- andrey > > Link: [1]: > http://patchwork.ozlabs.org/project/uboot/patch/20211203161802.12699-1-andrey.zhizhi...@leica-geosystems.com/