Also, rename it to XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP, since it only
covers delay slot exception support.

Signed-off-by: Ovidiu Panait <ovidiu.pan...@windriver.com>
---

 arch/microblaze/cpu/exception.c         | 2 +-
 board/xilinx/microblaze-generic/Kconfig | 9 +++++++++
 include/configs/microblaze-generic.h    | 3 ---
 3 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/microblaze/cpu/exception.c b/arch/microblaze/cpu/exception.c
index f60f1fc693..5601dde5b4 100644
--- a/arch/microblaze/cpu/exception.c
+++ b/arch/microblaze/cpu/exception.c
@@ -40,7 +40,7 @@ void _hw_exception_handler (void)
        case 0x7:
                puts("Priviledged or stack protection violation exception\n");
                break;
-#ifdef MICROBLAZE_V5
+#if CONFIG_IS_ENABLED(XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP)
        case 0x1000:
                puts("Exception in delay slot\n");
                break;
diff --git a/board/xilinx/microblaze-generic/Kconfig 
b/board/xilinx/microblaze-generic/Kconfig
index e31257d335..117b476f3f 100644
--- a/board/xilinx/microblaze-generic/Kconfig
+++ b/board/xilinx/microblaze-generic/Kconfig
@@ -47,6 +47,15 @@ config XILINX_MICROBLAZE0_USR_EXCEP
          the exception vector table. The user exception vector is located at
          C_BASE_VECTORS + 0x8 address.
 
+config XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP
+       bool "MicroBlaze delay slot exception support"
+       default y
+       help
+         Enable this option if the MicroBlaze processor supports exceptions
+         caused by delay slot instructions (processor version >= v5.00). When
+         enabled, the hw exception handler will print a message indicating
+         whether the exception was triggered by a delay slot instruction.
+
 config XILINX_MICROBLAZE0_VECTOR_BASE_ADDR
        hex "Location of MicroBlaze vectors"
        default 0x0
diff --git a/include/configs/microblaze-generic.h 
b/include/configs/microblaze-generic.h
index ca749ed18a..fd5a9cf8b8 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -11,9 +11,6 @@
 /* Microblaze is microblaze_0 */
 #define XILINX_FSL_NUMBER      3
 
-/* MicroBlaze CPU */
-#define        MICROBLAZE_V5           1
-
 #define CONFIG_SYS_BOOTM_LEN   (64 * 1024 * 1024)
 
 /* uart */
-- 
2.25.1

Reply via email to