[PATCH 4/7] microblaze: exception: fix return address for delay slot exceptions

[Ovidiu Panait]

According to the MicroBlaze reference manual (xilinx2021.2/ug984/page-37):
"""
If an exception is caused by an instruction in a delay slot (that is,
ESR[DS]=1), the exception handler should return execution to
the address stored in BTR instead of the normal exception return
address stored in R17.
"""

Adjust the code to print the proper return address for delay slot
exceptions.

Signed-off-by: Ovidiu Panait <ovidiu.pan...@windriver.com>
---

 arch/microblaze/cpu/exception.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/microblaze/cpu/exception.c b/arch/microblaze/cpu/exception.c
index 64d5fe4a80..f79e465e1f 100644
--- a/arch/microblaze/cpu/exception.c
+++ b/arch/microblaze/cpu/exception.c
@@ -20,11 +20,17 @@ void _hw_exception_handler (void)
        MFS(state, resr);
        printf("Hardware exception at 0x%x address\n", address);
        R17(address);
-       printf("Return address from exception 0x%x\n", address);
 
        if (CONFIG_IS_ENABLED(XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP) &&
-           (state & 0x1000))
+           (state & 0x1000)) {
+               /*
+                * For exceptions in delay slots, the return address is stored
+                * in the Branch Target Register (BTR), rather than R17.
+                */
+               MFS(address, rbtr);
+
                puts("Exception in delay slot\n");
+       }
 
        switch (state & 0x1f) { /* mask on exception cause */
        case 0x1:
@@ -49,6 +55,8 @@ void _hw_exception_handler (void)
                puts("Undefined cause\n");
                break;
        }
+
+       printf("Return address from exception 0x%x\n", address);
        printf("Unaligned %sword access\n", ((state & 0x800) ? "" : "half"));
        printf("Unaligned %s access\n", ((state & 0x400) ? "store" : "load"));
        printf("Register R%x\n", (state & 0x3E) >> 5);
-- 
2.25.1