Add properties to the Authenta SPI flash device node to enable access by
a UEFI application using a fixed GUID. Also specify that this device is
JEDEC compatible so that it is correctly initialized when running
`sf probe`.
Signed-off-by: Paul Barker <paul.bar...@sancloud.com>
---
arch/arm/dts/am335x-sancloud-bbe-lite.dts | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/am335x-sancloud-bbe-lite.dts
b/arch/arm/dts/am335x-sancloud-bbe-lite.dts
index d6ef19311a91..01866f3c3ff7 100644
--- a/arch/arm/dts/am335x-sancloud-bbe-lite.dts
+++ b/arch/arm/dts/am335x-sancloud-bbe-lite.dts
@@ -37,14 +37,18 @@
pinctrl-names = "default";
pinctrl-0 = <&bb_spi0_pins>;
- channel@0 {
+ authenta-flash@0 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "micron,spi-authenta";
+ compatible = "micron,spi-authenta", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <16000000>;
spi-cpha;
+
+ uefi-spi-vendor = "micron";
+ uefi-spi-part-number = "mt25ql128abb";
+ uefi-spi-io-guid = [30671277 caa4 8643 b341 881fe18e7f7d];
};
};
--
2.25.1
