Hi Filip, On Mon, 19 Dec 2022 at 14:25, Filip Žaludek <filip.zalu...@oracle.com> wrote: > > > > Hi Simon, > > > On 12/19/22 20:20, Simon Glass wrote: > > Hi Filip, > > > > On Mon, 19 Dec 2022 at 02:29, Filip Žaludek <filip.zalu...@oracle.com> > > wrote: > >> > >> > >> > >> Hi Simon, > >> > >> is your testing framework connected to HDMI? Only notable discrepancy > >> from generic config is enabled 'efidebug' command. > >> > >> > >> Tested more (cycled 'U-Boot>' and 'reset'), both RPi3B and RPi3B+.. > >> USB Keyboard failure rates: > >> connected console 02/10 > >> connected hdmi 06/10 > >> connected console + hdmi 07/10 > >> ** USB Keyboard always detected by 'usb info', just does not respond. > >> > >> USB Keyboard failure rates, reverted > >> 96991e652f541323a03c5b7e075d54a117091618: > >> connected console + hdmi 00/10 > > > > Yes this one does have HDMI. Are you wanting me to run multiple runs? > > With or without the display? > > > Yes please! With HDMI as there is better chance you will hit issue I am > experiencing, > to confirm 96991e652f541323a03c5b7e075d54a117091618 is inferior for RPi3. > You should see usb_kbd detected, but no input possible.
I am not seeing this problem, but the HDMI is not actually working. It could be because of a setting in the silly config.txt file, e.g. gpu_freq=250 The display comes to life and then says no signal. But I tried it 10 times on us/next and the USB keyboard worked each time. Regards, Simon