From: Chris Morgan <macromor...@hotmail.com>
Add gpio-ranges property to GPIO nodes so that the bank ID can
be correctly derived for each GPIO bank.
Signed-off-by: Chris Morgan <macromor...@hotmail.com>
---
arch/arm/dts/rk356x.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi
index 5706c3e24f..6492ace0de 100644
--- a/arch/arm/dts/rk356x.dtsi
+++ b/arch/arm/dts/rk356x.dtsi
@@ -1806,6 +1806,7 @@
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -1817,6 +1818,7 @@
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -1828,6 +1830,7 @@
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -1839,6 +1842,7 @@
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -1850,6 +1854,7 @@
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
gpio-controller;
+ gpio-ranges = <&pinctrl 0 128 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
--
2.34.1
