Hey again Andre,
On 5/26/23 20:15, Sam Edwards wrote:
My "no success" is Linux stalling indefinitely at:
[ 0.123090] smp: Bringing up secondary CPUs ...
OK, correction: my "no success" was Linux being unable to access the
GIC, so boot was getting stuck. This was because it was running in
nonsec mode and the GIC wasn't getting the interrupts moved over into
group1.
The root cause of THAT was that the T113's CBAR's PERIPHBASE is still
0x01C80000, where the GIC used to be on the older ARM sunxis. Allwinner
never updated their ARM cores when they moved the GIC to 0x03020000!
Guess we need a `#define CFG_ARM_GIC_BASE_ADDRESS 0x03020000`. Where do
you recommend I put that? :)
I also think sunxi/psci.c:psci_arch_init needs some cleanup:
- It sets GICC_PMR to 0xFF, which should probably be removed because
that was already done by `_nonsec_init`
- It tries to clear the NS bit of SCR to enter secure mode, but the NS
bit is just enabled later in `_secure_monitor`. So that should also be
removed because it has no effect.
So, I'll have a few PSCI patches for you soon -- once I rest up from all
of that GIC debugging, that is!
Cheers,
Sam
