On 15/12/2011 17:21, Fabio Estevam wrote: > Add initial support for Freescale MX28EVK board. > > Tested boot via SD card and by loading a kernel via TFTP through > the FEC interface. > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> > --- > - For correct operation of saving environment variables into the SD card, > the following patch is needed: > http://lists.denx.de/pipermail/u-boot/2011-November/111448.html > > Changes since v1: > - Read the MAC from fuses > - Use tabs instead of space in u-boot.bd > - Use puts instead of print > - Factor out mac reading function > - Factor out ddr size calculation function > - Use GENERATED_GBL_DATA_SIZE > - Protect CONFIG_ENV_IS_IN_MMC > > MAINTAINERS | 1 + > arch/arm/cpu/arm926ejs/mx28/mx28.c | 56 +++++++++ > arch/arm/include/asm/arch-mx28/sys_proto.h | 3 + > board/denx/m28evk/m28evk.c | 56 --------- > board/freescale/common/sdhc_boot.c | 2 + > board/freescale/mx28evk/Makefile | 49 ++++++++ > board/freescale/mx28evk/iomux.c | 138 ++++++++++++++++++++++ > board/freescale/mx28evk/mx28evk.c | 164 ++++++++++++++++++++++++++ > board/freescale/mx28evk/u-boot.bd | 14 +++ > boards.cfg | 1 + > include/configs/mx28evk.h | 172 > ++++++++++++++++++++++++++++ > 11 files changed, 600 insertions(+), 56 deletions(-) > create mode 100644 board/freescale/mx28evk/Makefile > create mode 100644 board/freescale/mx28evk/iomux.c > create mode 100644 board/freescale/mx28evk/mx28evk.c > create mode 100644 board/freescale/mx28evk/u-boot.bd > create mode 100644 include/configs/mx28evk.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index a56ca10..72e1089 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -639,6 +639,7 @@ Kristoffer Ericson <kristoffer.eric...@gmail.com> > Fabio Estevam <fabio.este...@freescale.com> > > mx25pdk i.MX25 > + mx28evk i.MX28 > mx31pdk i.MX31 > mx53ard i.MX53 > mx53smd i.MX53 > diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c > b/arch/arm/cpu/arm926ejs/mx28/mx28.c > index 088c019..e15b158 100644 > --- a/arch/arm/cpu/arm926ejs/mx28/mx28.c > +++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c > @@ -214,6 +214,62 @@ int cpu_eth_init(bd_t *bis) > } > #endif > > +#ifdef CONFIG_MX28_FEC_MAC_IN_OCOTP > + > +#define MXS_OCOTP_MAX_TIMEOUT 1000000 > +void imx_get_mac_from_fuse(char *mac) > +{ > + struct mx28_ocotp_regs *ocotp_regs = > + (struct mx28_ocotp_regs *)MXS_OCOTP_BASE; > + uint32_t data;
Wait...this patch conflict with your first patch of your patchset, where you have already move this code in a common place. Anything wrong with your patchset ? Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
