> Let dram_init function be a common function, so that other mx28 boards
> can reuse it.
>
> Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
> ---
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 21 +++++++++++++++++++++
> arch/arm/include/asm/arch-mx28/sys_proto.h | 1 +
> board/denx/m28evk/m28evk.c | 21 ---------------------
> 3 files changed, 22 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c
> b/arch/arm/cpu/arm926ejs/mx28/mx28.c index 785978f..ec8eaf9 100644
> --- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
> +++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
> @@ -249,6 +249,27 @@ void imx_get_mac_from_fuse(char *mac)
> }
> #endif
>
> +#define HW_DIGCTRL_SCRATCH0 0x8001c280
> +#define HW_DIGCTRL_SCRATCH1 0x8001c290
> +int dram_init(void)
> +{
> + uint32_t sz[2];
> +
> + sz[0] = readl(HW_DIGCTRL_SCRATCH0);
> + sz[1] = readl(HW_DIGCTRL_SCRATCH1);
> +
> + if (sz[0] != sz[1]) {
> + puts("MX28:\n"
> + "Error, the RAM size in HW_DIGCTRL_SCRATCH0 and\n"
> + "HW_DIGCTRL_SCRATCH1 is not the same. Please\n"
> + "verify these two registers contain valid RAM size!\n");
> + hang();
> + }
> +
> + gd->ram_size = sz[0];
> + return 0;
> +}
> +
> U_BOOT_CMD(
> clocks, CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
> "display clocks",
> diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h
> b/arch/arm/include/asm/arch-mx28/sys_proto.h index cf5ab16..745b84d 100644
> --- a/arch/arm/include/asm/arch-mx28/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mx28/sys_proto.h
> @@ -36,5 +36,6 @@ void mx28_common_spl_init(const iomux_cfg_t *iomux_setup,
> #endif
>
> void imx_get_mac_from_fuse(char *mac);
> +int dram_init(void);
Rename it to mx28_dram_init() or something please.
>
> #endif /* __MX28_H__ */
> diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
> index 005446a..d6a2a50 100644
> --- a/board/denx/m28evk/m28evk.c
> +++ b/board/denx/m28evk/m28evk.c
> @@ -70,27 +70,6 @@ int board_init(void)
> return 0;
> }
>
> -#define HW_DIGCTRL_SCRATCH0 0x8001c280
> -#define HW_DIGCTRL_SCRATCH1 0x8001c290
> -int dram_init(void)
> -{
> - uint32_t sz[2];
> -
> - sz[0] = readl(HW_DIGCTRL_SCRATCH0);
> - sz[1] = readl(HW_DIGCTRL_SCRATCH1);
> -
> - if (sz[0] != sz[1]) {
> - printf("MX28:\n"
> - "Error, the RAM size in HW_DIGCTRL_SCRATCH0 and\n"
> - "HW_DIGCTRL_SCRATCH1 is not the same. Please\n"
> - "verify these two registers contain valid RAM size!\n");
> - hang();
> - }
> -
> - gd->ram_size = sz[0];
> - return 0;
> -}
> -
> #ifdef CONFIG_CMD_MMC
> static int m28_mmc_wp(int id)
> {
M
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
