We have been using both the 65’s and the 90’s. Like I said, they work really well in our less than a mile areas, better than any sector would in fact.
While I can connect devices over a mile, the signals on the receive side of the sector don’t meet our minimum qualifications for a connection. I think its a gain issue on the horn. 10 Dbi just isn’t enough for long range PTMP at our return signal requirements. *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On Behalf Of *Tasos Alexiou *Sent:* Tuesday, September 27, 2016 9:50 AM *To:* Ubiquiti Users Group <ubnt_users@wispa.org> *Subject:* Re: [Ubnt_users] R5AC-PRISM-US Chris, Thanks for that feedback. I have a few questions. What horns are you using and what CPE's are connected? Customers are able to connect some devices over 10miles. For example using Airgrids or PBE400's on 30deg Horns. We had someone with a 30deg Horn and RocketM5 connect to a NSM5LOCO at almost 3 miles. Regards, Tasos Alexiou Managing Partner RFelements North America LLC Skype: tasosrfe eMail: ta...@rfelements.com Web: www.rfelements.com Facebook: www.facebook.com/rfelements http://www.linkedin.com/in/tasosalexiou This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of RF elements s.r.o. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. On Tue, Sep 27, 2016 at 11:55 AM, Chris Ruschmann <ch...@scsalaska.net> wrote: I use the feed horns as well, they work great up close, but as you get farther out, more than a mile, they start to have issues I've found. How far are you connecting you're your devices at? -----Original Message----- From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of G. Nicholas Sent: Monday, September 26, 2016 7:29 PM To: Ubiquiti Users Group <ubnt_users@wispa.org> Subject: Re: [Ubnt_users] R5AC-PRISM-US Evan, Yes you have the correct pairing, we just converted a tower site from 4 Prism's on the UB Titanium sectors to the RF Elements 30deg horns. Greatly reduced the noise floor by going to the 30deg which gave us higher SNR and more 8x rates. doing an ABC channel config until UB actually gets the GPS sync on the Prisms working. Total capacity on the tower now is over 2 GBps. Garth ----- Original Message ----- From: Evan Galvin Sent: 9/26/2016 7:42:35 PM To: ubnt_users@wispa.org Subject: [Ubnt_users] R5AC-PRISM-US > Hey guys, just wanted to confirm that the R5AC-PRISM-US has a metal > shielded housing on it. > > Do you think it would pair up good with this combo: > > https://www.streakwave.com/Itemdesc.aspb _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
