Lol... No worries. The 30s rock and our 50 or 60 have great performance. The 90s are great little sectors but range can be limited. I hope you report back your results when you try the 60 or 30.
On Sep 27, 2016 8:06 PM, "Chris Ruschmann" <ch...@scsalaska.net> wrote: > Well shit, I guess if I just would have went on your site I would have saw > that J > > > > I guess I have the 60’s as well, not 65’s as you don’t make them, I > haven’t deployed any yet though, only the 90’s. > > > > Thanks though, I’ll give them a shot. > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > *On Behalf Of *Tasos Alexiou > *Sent:* Tuesday, September 27, 2016 4:47 PM > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > *Subject:* Re: [Ubnt_users] R5AC-PRISM-US > > > > Chris, > > > > We have a 18db 30deg version that is performing better than 20 or 21db > traditional sectors as Garth mentioned. You should give one of them a try.. > > > > > Regards, > > Tasos Alexiou > Managing Partner > RFelements North America LLC > > Skype: tasosrfe > eMail: ta...@rfelements.com > Web: www.rfelements.com > > Facebook: www.facebook.com/rfelements > > http://www.linkedin.com/in/tasosalexiou > > > This email and any attachments to it may be confidential and are intended > solely for the use of the individual to whom it is addressed. Any views or > opinions expressed are solely those of the author and do not necessarily > represent those of RF elements s.r.o. If you are not the intended recipient > of this email, you must neither take any action based upon its contents, > nor copy or show it to anyone. Please contact the sender if you believe you > have received this email in error. > > > > On Tue, Sep 27, 2016 at 7:39 PM, Chris Ruschmann <ch...@scsalaska.net> > wrote: > > It depends on the noise floor, most cpe’s according to the interface sit > in the 90’s. At the sector it’s usually in the high 80’s to low 90’s. > > > > So when we set people up and the return signal is in low to mid 70’s we > tend to not want to install. So several times this has happened, we have > just swapped the sector back to the AC 65degree panels and get to where we > need to be in the mid 60’s. Which makes sense since your adding 10 dbi back > to the link. > > > > So the question is, can you make a high gain version of the horns? A 16 to > 20 dbi model would solve most issues for us on the longer shots. > > > > > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > *On Behalf Of *Mike Hammett > *Sent:* Tuesday, September 27, 2016 4:26 PM > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > *Subject:* Re: [Ubnt_users] R5AC-PRISM-US > > > > What are the SNRs\modulations like for the longer out ones? > > > > ----- > Mike Hammett > > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > ------------------------------ > > *From: *"Chris Ruschmann" <ch...@scsalaska.net> > *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org> > *Sent: *Tuesday, September 27, 2016 5:36:27 PM > *Subject: *Re: [Ubnt_users] R5AC-PRISM-US > > We have been using both the 65’s and the 90’s. Like I said, they work > really well in our less than a mile areas, better than any sector would in > fact. > > > > While I can connect devices over a mile, the signals on the receive side > of the sector don’t meet our minimum qualifications for a connection. I > think its a gain issue on the horn. 10 Dbi just isn’t enough for long range > PTMP at our return signal requirements. > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > *On Behalf Of *Tasos Alexiou > *Sent:* Tuesday, September 27, 2016 9:50 AM > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > *Subject:* Re: [Ubnt_users] R5AC-PRISM-US > > > > Chris, > > > > Thanks for that feedback. I have a few questions. What horns are you > using and what CPE's are connected? > > > > Customers are able to connect some devices over 10miles. For example > using Airgrids or PBE400's on 30deg Horns. We had someone with a 30deg Horn > and RocketM5 connect to a NSM5LOCO at almost 3 miles. > > > > > Regards, > > Tasos Alexiou > Managing Partner > RFelements North America LLC > > Skype: tasosrfe > eMail: ta...@rfelements.com > Web: www.rfelements.com > > Facebook: www.facebook.com/rfelements > > http://www.linkedin.com/in/tasosalexiou > > > This email and any attachments to it may be confidential and are intended > solely for the use of the individual to whom it is addressed. Any views or > opinions expressed are solely those of the author and do not necessarily > represent those of RF elements s.r.o. If you are not the intended recipient > of this email, you must neither take any action based upon its contents, > nor copy or show it to anyone. Please contact the sender if you believe you > have received this email in error. > > > > On Tue, Sep 27, 2016 at 11:55 AM, Chris Ruschmann <ch...@scsalaska.net> > wrote: > > I use the feed horns as well, they work great up close, but as you get > farther out, more than a mile, they start to have issues I've found. > > How far are you connecting you're your devices at? > > -----Original Message----- > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > On Behalf Of G. Nicholas > Sent: Monday, September 26, 2016 7:29 PM > To: Ubiquiti Users Group <ubnt_users@wispa.org> > Subject: Re: [Ubnt_users] R5AC-PRISM-US > > Evan, > > Yes you have the correct pairing, we just converted a tower site from 4 > Prism's on the UB Titanium sectors to the RF Elements 30deg horns. > Greatly reduced the noise floor by going to the 30deg which gave us higher > SNR and more 8x rates. doing an ABC channel config until UB actually gets > the GPS sync on the Prisms working. Total capacity on the tower now is > over 2 GBps. > > > Garth > > ----- Original Message ----- > From: Evan Galvin > Sent: 9/26/2016 7:42:35 PM > To: ubnt_users@wispa.org > Subject: [Ubnt_users] R5AC-PRISM-US > > > Hey guys, just wanted to confirm that the R5AC-PRISM-US has a metal > > shielded housing on it. > > > > Do you think it would pair up good with this combo: > > > > https://www.streakwave.com/Itemdesc.aspb > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
