And it looks like you either have antenna gain set wrong or need to work on the alignment, Matt.
On Mon, Mar 26, 2018, 12:01 PM Mathew Howard <mat...@litewire.net> wrote: > Yeah, but you have a much stronger link - you're at -48 with 17dbm Tx > Power. > > ________________________________________ > From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on > behalf of Matt Hoppes [mattli...@rivervalleyinternet.net] > Sent: Monday, March 26, 2018 11:26 AM > To: Ubiquiti Users Group; Darin Steffl > Subject: Re: [Ubnt_users] AF11 10x > > I'm not sure what has been discussed here, but we have 10x going on this > link (see picture) > > On 3/26/18 11:48 AM, Darin Steffl wrote: > > Alex, > > > > Frequency coordinators are supposed to find you spectrum but at the end > > of the day, it's up to your company to engineer/design the link to meet > > your required signal and bandwidth needs. The manual for the AF11fx > > clearly spells out the required signal levels and power levels needed to > > achieve 6x, 8x, 10x modulation schemes. 18db is MAX power that can be > > used to achieve 10x for example and then whatever the required signal > > level is listed but I don't have it memorized. > > > > Sorry to put you on the spot and I don't mean any disrespect but you > > guys kind of messed up. Don't rely on frequency coordinators to design > > your links. Only use them to find you spectrum. > > > > A 17 mile link in 11ghz should definitely have minimum 3 foot antennas > > on each end but I would plan on using 4 foot antennas to be safe if the > > link is important to you and you want max bandwidth. > > > > On Mon, Mar 26, 2018 at 11:38 AM, alex phillips <highspeedl...@gmail.com > > <mailto:highspeedl...@gmail.com>> wrote: > > > > Yes, this is what I Am concluding as well. I have spoken with my > > freq coordinator about making changes to their software that > > estimates these links to account for this. > > > > /*Alex Phillips*/ > > CEO and General Manager > > RBNS.net > > HighSpeedLink.net > > *540-908-3993 <tel:(540)%20908-3993>* > > Co-Host AmericanPriority.com American Priority Conference > > September 6-8th 2018 > > #AMP18 > > @PriorityConf Twitter > > > > On Mon, Mar 26, 2018 at 11:35 AM, Mathew Howard <mat...@litewire.net > > <mailto:mat...@litewire.net>> wrote: > > > > Yes, but the bigger problem here, if I'm reading Alex's > > screenshot correctly, is that this is a 17 mile link using 2' > > dishes, and there's a very good chance that there simply isn't > > enough signal for 10X to work. According to airlink, the signal > > should be right on the edge of 10X territory at that distance, > > which those antennas, but in the real world there's a good > > chance it isn't going to work... and there's certainly no fade > > margin to speak of at 10X. > > > > > ------------------------------------------------------------------------ > > *From:* ubnt_users-boun...@wispa.org > > <mailto:ubnt_users-boun...@wispa.org> > > [ubnt_users-boun...@wispa.org > > <mailto:ubnt_users-boun...@wispa.org>] on behalf of David Jones > > [d...@nglconnection.com <mailto:d...@nglconnection.com>] > > *Sent:* Monday, March 26, 2018 5:42 AM > > > > *To:* Ubiquiti Users Group > > *Subject:* Re: [Ubnt_users] AF11 10x > > > > I can confirm with Adair > > > > in order to get 10x you need TX set at 18 and no auto power back > > off. However you can use the MIMO and Short CP > > > > > > On Sun, Mar 25, 2018 at 9:05 AM, Mathew Howard > > <mat...@litewire.net <mailto:mat...@litewire.net>> wrote: > > > > I haven't ever been able to get the auto power back off to > > work properly... the first thing I'd try would be to turn > > that off and just set the max power to 18dbm... but the > > problem is, that when you do that, you're going to probably > > lose too much signal to maintain a 10x link (judging from > > the dashboard screenshot). If you go to the latest beta > > firmware, you'll probably be able to get 9x working, but I > > suspect the link just isn't going to be able to do 10x. > > > > > ------------------------------------------------------------------------ > > *From:* ubnt_users-boun...@wispa.org > > <mailto:ubnt_users-boun...@wispa.org> > > [ubnt_users-boun...@wispa.org > > <mailto:ubnt_users-boun...@wispa.org>] on behalf of alex > > phillips [highspeedl...@gmail.com > > <mailto:highspeedl...@gmail.com>] > > *Sent:* Friday, March 23, 2018 9:33 AM > > *To:* Ubiquiti Users Group > > *Subject:* Re: [Ubnt_users] AF11 10x > > > > Like this? > > > > https://i.imgur.com/I23ggVX.png > > <https://i.imgur.com/I23ggVX.png> > > > > > > That's how we've had it set, and we're still only seeing 8x. > > > > https://i.imgur.com/18JUkVz.png > > <https://i.imgur.com/18JUkVz.png> > > > > > > /*Alex Phillips*/ > > CEO and General Manager > > RBNS.net > > HighSpeedLink.net > > *540-908-3993 <tel:(540)%20908-3993>* > > Co-Host AmericanPriority.com American Priority Conference > > September 6-8th 2018 > > #AMP18 > > @PriorityConf Twitter > > > > On Fri, Mar 23, 2018 at 10:30 AM, Adair Winter > > <ada...@amarillowireless.net > > <mailto:ada...@amarillowireless.net>> wrote: > > > > What is your conducted power set to? > > > > On Fri, Mar 23, 2018, 9:29 AM alex phillips > > <highspeedl...@gmail.com > > <mailto:highspeedl...@gmail.com>> wrote: > > > > I have it set like the lic says but it wont hit > > 10x. Ubnt support suggested reducing power and that > > did not help. > > > > /*Alex Phillips*/ > > CEO and General Manager > > RBNS.net > > HighSpeedLink.net > > *540-908-3993 <tel:(540)%20908-3993>* > > Co-Host AmericanPriority.com American Priority > > Conference > > September 6-8th 2018 > > #AMP18 > > @PriorityConf Twitter > > > > On Fri, Mar 23, 2018 at 10:27 AM, Seth Mattinen > > <se...@rollernet.us <mailto:se...@rollernet.us>> > wrote: > > > > On 3/23/18 7:03 AM, alex phillips wrote: > > > Can those who use AF11 and are able to > establish a link a 10x reliably > > > please share your link information? > > > > > > Distance, Dish and power settings. > > > > > > Match your license. Don't randomly increase > > power, 11GHz travels a long > > way and you can easily interfere with another > > licensee. > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org <mailto: > Ubnt_users@wispa.org> > > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > < > http://lists.wispa.org/mailman/listinfo/ubnt_users> > > > > > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org> > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > <http://lists.wispa.org/mailman/listinfo/ubnt_users> > > > > > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org> > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > <http://lists.wispa.org/mailman/listinfo/ubnt_users> > > > > > > > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org> > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > <http://lists.wispa.org/mailman/listinfo/ubnt_users> > > > > > > > > > > -- > > David Jones > > NGL Connection > > 307-288-5491 ext 702 <tel:(307)%20288-5491> > > > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org> > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > <http://lists.wispa.org/mailman/listinfo/ubnt_users> > > > > > > > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org> > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > <http://lists.wispa.org/mailman/listinfo/ubnt_users> > > > > > > > > > > -- > > Darin Steffl > > Minnesota WiFi > > www.mnwifi.com <http://www.mnwifi.com/> > > 507-634-WiFi > > <http://www.facebook.com/minnesotawifi> Like us on Facebook > > <http://www.facebook.com/minnesotawifi> > > > > > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users