Yes I think hsdpa refers to a section in a wvdial file. A section is inclosed in square brackets [] if you use the section [dialer defaults] you don't need to call the section so you would just type wvdial and the command prompt not wvdial hsdpa. However I don't think thats your problem as it looked like it used the default section as a fall back when it couldn't find hsdpa. Where did you get that mobile number most 3g modems I know use a short code such as *99# to dial 3g. Next question is do you require a username and password (ie did voda provide you one) if not they should be blank.
On Wed, Aug 19, 2009 at 2:55 PM, opm595<opm...@yahoo.com.au> wrote: > Hi Guys, > The Mobile Broadband for 9.04 using Vodafone saga continues . . . and I'm > not too sure if I'm beating a dead horse or not here. > So, anyway, I ended up buying the modem, and after reading a fair bit on > various forums and Google searching etc I'm up to the stage of trying to > connect. The modem itself is a Huawei K3520 (from Vodafone) and from what > I've read it can work with a bit of perseverance using 'wvdial' (from a > terminal window). > I think my main prob' now is trying to determine the right config' for > Australian settings in the wvdial.conf file. At present it looks like this: > [Dialer Defaults] > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Modem Type = Analog Modem > Baud = 460800 > New PPPD = yes > Modem = /dev/ttyUSB1 > ISDN = 0 > Phone = *+61451358399# > Password = username > Username = password > Init4 = AT+CGDCONT=1,"IP","vf.internet.au" > -------- > But, when I try to connect, I'm getting this: > o...@rob2:~$ wvdial hsdpa > --> WvDial: Internet dialer version 1.60 > --> Warning: section [Dialer hsdpa] does not exist in wvdial.conf. > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Sending: AT+CGDCONT=1,"IP","vf.internet.au" > AT+CGDCONT=1,"IP","vf.internet.au" > OK > --> Modem initialized. > --> Sending: ATDT*+61451358399# > --> Waiting for carrier. > ATDT*+61451358399# > ^BOOT:34338102,0,0,0,72 > NO CARRIER > --> No Carrier! Trying again. > --> Sending: ATDT*+61451358399# > --> Waiting for carrier. > ATDT*+61451358399# > > "Warning: section [Dialer hsdpa] does not exist in wvdial.conf" <- does > this mean I need a different script variation or something? > Any assistance, much appreciated. > Cheers, > Rob > > -- > =============================================== > Local Id: OPM595 > Email: opm...@yahoo.com.au > PO Box 190, Narellan NSW 2567 Australia > Aude aliquid dignum - "Dare Something Worthy" > =============================================== > > > -- > ubuntu-au mailing list > ubuntu-au@lists.ubuntu.com > https://lists.ubuntu.com/mailman/listinfo/ubuntu-au > > -- ubuntu-au mailing list ubuntu-au@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-au