On Tue, 2007-11-27 at 15:52 +0000, Tom Bamford wrote: > I would install Windows in the same way but after Windows is installed, > you can set the Windows drive to slave and reconnect your Ubuntu drive > as master. Then just add this entry to your grub menu after the line > that reads "END DEBIAN AUTOMAGIC KERNELS": > > title Windows > map (hd0) (hd1) > map (hd1) (hd0) > rootnoverify (hd1,0) > chainloader +1 > > Windows still recognises itself as being on the master drive thanks to grub. > > Regards, > Tom > > Keith Gregory wrote: > > The way I would do that is > > 1 Disconnect Ubuntu drive > > 2 Add Windows hard drive as primary drive, Boot and install drivers etc. > > 3 Reconnect Ubuntu drive configured as slave > > 4 Boot from Ubuntu install disk using repair option see if that will > > reconfigure grub for you
Thanks every one for being so helpful I will try things, hopefully, tomorrow and will report back. Incidentally, does it matter which drive the end of the cable is connected to? Norman -- ubuntu-uk@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-uk https://wiki.kubuntu.org/UKTeam/