On Monday 24 September 2012 1:05:16 am Philippe De Muyter wrote: > Hello, > > I have cleaned up and updated to 3.6-rc5 my previous port of the > freescale-written driver for the fast Ethernet Controller of the M547x > and M548x ColdFires. It seems from comments found in Freescale sources > that this uses a MultiChannel DMA controller marketed as MCD and available > also in the NPC8220 also from Freescale. Therefore, I have split the > submission in three parts : > A generic MCD dma driver > The M54xx instantiation of the MCD driver > The FEC driver for M54xx > > I know there are still lines above 80 characters, but I feel they must be > left that way. There are also parts of an unfinished netpoll interface. > > Feel free to test and comment.
So whatever happened with this? Was there ever any feedback from the other maintainers? For what it is worth, I was able to take the original patches and rebase them to v3.15-rc6 with just a couple of very minor changes and produce a working ethernet for my 5484 system. _______________________________________________ uClinux-dev mailing list uClinux-dev@uclinux.org http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by uclinux-dev@uclinux.org To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
