On 31/05/14 12:09, Steven King wrote: > On Monday 24 September 2012 1:05:16 am Philippe De Muyter wrote: >> Hello, >> >> I have cleaned up and updated to 3.6-rc5 my previous port of the >> freescale-written driver for the fast Ethernet Controller of the M547x >> and M548x ColdFires. It seems from comments found in Freescale sources >> that this uses a MultiChannel DMA controller marketed as MCD and available >> also in the NPC8220 also from Freescale. Therefore, I have split the >> submission in three parts : >> A generic MCD dma driver >> The M54xx instantiation of the MCD driver >> The FEC driver for M54xx >> >> I know there are still lines above 80 characters, but I feel they must be >> left that way. There are also parts of an unfinished netpoll interface. >> >> Feel free to test and comment. > > So whatever happened with this? Was there ever any feedback from the other > maintainers? > > For what it is worth, I was able to take the original patches and rebase them > to v3.15-rc6 with just a couple of very minor changes and produce a working > ethernet for my 5484 system.
I don't recall seeing too much. Time to try again? Regards Greg _______________________________________________ uClinux-dev mailing list uClinux-dev@uclinux.org http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by uclinux-dev@uclinux.org To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
