you need a Cable like this one: http://www.satcompany.de/modules.php?warp=artikel&id=685 then follow this instruction: http://www.3113.com/dave/sun/solutions/xos-tipHardwire.html you will need a second SUN Computer If you don't have one ask me I have a lot of Sun machines located in Buesingen or buy in Ebay a Sun Blade 150 for 40 Dollar. (By the way the Blade 150 can be used later with OpenBSD as an very save Router)
best regards Bob Silvan Michael Gebhardt wrote: > I was not able to put in a nullmodem, as the serial port would need a > gender changer for the serial port :( > > I haven't found good information yet... > > > I am willing to buy a cable, but I need to know which pins... > > > lg > Silvan > > Am 21.04.2009 um 21:01 schrieb Mika Borner: > >> Silvan Michael Gebhardt wrote: >>> Hi Folks >>> >>> I need some help with a T1000 - I got it with no Serial Cable and it >>> does not seem to send out a DHCP request - is there a way to fully >>> reset the SCP without having to use the Serial Console? I am happy >>> with DHCP which is, reading the manual, the default after a reset, >>> but I dont have a request yet. I haven't reached the previous owner >>> yet to get the old SCP IP Adress, nor do I have a way to get to a >>> cable, I tried a 74-0495-01 Adapter which the turned out to be one >>> for cisco, not for this kind of equipment :( >>> >>> or has someone a hint where to get the right 8P8C to DB9 Adapter? >>> >>> >> >> Did you try with a nullmodem in between? >> >> Cheers >> Mika > > _______________________________________________ > ug-chosug mailing list > ug-chosug at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/ug-chosug > >
