Hello Robert, I need a 8P8C to RJ45 Adapter first, I already got a nullmodem kabel - but this does not help on the T1000
and I doubt I need another sun, I suppose a normal PC will work fine with 9600 8N1 ;) lg Silvan Am 21.04.2009 um 12:29 schrieb Robert: > you need a Cable like this one: > http://www.satcompany.de/modules.php?warp=artikel&id=685 > then follow this instruction: > http://www.3113.com/dave/sun/solutions/xos-tipHardwire.html > you will need a second SUN Computer > If you don't have one ask me I have a lot of Sun machines located in > Buesingen > or buy in Ebay a Sun Blade 150 for 40 Dollar. > (By the way the Blade 150 can be used later with OpenBSD as an very > save Router) > > best regards Bob > > Silvan Michael Gebhardt wrote: >> I was not able to put in a nullmodem, as the serial port would need >> a gender changer for the serial port :( >> >> I haven't found good information yet... >> >> >> I am willing to buy a cable, but I need to know which pins... >> >> >> lg >> Silvan >> >> Am 21.04.2009 um 21:01 schrieb Mika Borner: >> >>> Silvan Michael Gebhardt wrote: >>>> Hi Folks >>>> >>>> I need some help with a T1000 - I got it with no Serial Cable and >>>> it does not seem to send out a DHCP request - is there a way to >>>> fully reset the SCP without having to use the Serial Console? I >>>> am happy with DHCP which is, reading the manual, the default >>>> after a reset, but I dont have a request yet. I haven't reached >>>> the previous owner yet to get the old SCP IP Adress, nor do I >>>> have a way to get to a cable, I tried a 74-0495-01 Adapter which >>>> the turned out to be one for cisco, not for this kind of >>>> equipment :( >>>> >>>> or has someone a hint where to get the right 8P8C to DB9 Adapter? >>>> >>>> >>> >>> Did you try with a nullmodem in between? >>> >>> Cheers >>> Mika >> >> _______________________________________________ >> ug-chosug mailing list >> ug-chosug at opensolaris.org >> http://mail.opensolaris.org/mailman/listinfo/ug-chosug >> >> >
