ezekieldas wrote: > I managed to get the i386 binary working on a VM with the addition of a > couple libs. At this point it seems to be happy with my output > specification and > it connects to the server BUT I do not hear any music. I can confirm > this SPDIF out is functional as that's been the working setup for the > host system and I can > play music on this VM using mpg123. Any ideas? > > > > Code: -------------------- > > > [root@fuzzy tmp]# ./squeezelite-i386 -d all=debug -o iec958:CARD=Intel,DEV=0 192.168.1.5 > [09:31:01.454656] output_init:648 init output > [09:31:01.455307] output_init:651 outputbuf size: 3528000 > [09:31:01.462238] output_init:665 output: iec958:CARD=Intel,DEV=0 maxrate: 44100 > [09:31:01.462712] output_thread:295 open output device: iec958:CARD=Intel,DEV=0 > [09:31:01.463146] alsa_open:186 opened device iec958:CARD=Intel,DEV=0 using format: S16_LE sample rate: 44100 > [09:31:01.463696] alsa_open:237 buffer time: 20317 period count: 4 buffer size: 896 period size: 224 > [09:31:01.467308] stream_init:214 init stream > [09:31:01.467642] stream_init:215 streambuf size: 2097152 > [09:31:01.468020] decode_init:89 init decode > [09:31:01.468599] load_faad:216 loaded libfaad.so.2 cap: 0x1f > [09:31:01.469054] load_vorbis:206 loaded libvorbisfile.so.3 > [09:31:01.469486] load_flac:183 loaded libFLAC.so.8 > [09:31:01.469603] register_pcm:139 using pcm > [09:31:01.469835] load_mad:198 loaded libmad.so.0 > [09:31:01.470031] slimproto:575 connecting to 192.168.1.5:3483 > [09:31:01.470170] slimproto:576 cap: MaxSampleRate=44100,aac,ogg,flc,aif,pcm,mp3 > [09:31:01.470524] slimproto:589 connected > [09:31:01.470804] sendHELO:115 mac: 08:00:27:d0:30:58 > [09:31:01.472151] process:340 strm > [09:31:01.473013] process_strm:209 strm command q > [09:31:01.474253] process:344 unhandled setd > [09:31:01.474587] process:344 unhandled setd > [09:31:01.474891] process:340 aude > [09:31:01.475000] process_aude:297 enable spdif: 1 dac: 1 > [09:31:01.475162] process:340 audg > [09:31:01.475267] process_audg:314 audg gainL: 3840 gainR: 3840 > [09:31:04.008698] process:340 strm > [09:31:04.009153] process_strm:209 strm command t > [09:31:04.009496] sendSTAT:154 STAT: STMt > [09:31:09.008762] process:340 strm > [09:31:09.008812] process_strm:209 strm command t > -------------------- > >
Can you get aplay or similar to work in the VM - I suspect this problem is with the VM rather than squeezelite, but I would try to avoid VMs if possible. Is there any reason why you can't use a newer linux? I've been planning to change the eventfd code so it works with ulibc, but not to remove it - so linux 2.6.22 is likely to be required as per ralphy's post ------------------------------------------------------------------------ Triode's Profile: http://forums.slimdevices.com/member.php?userid=17 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
