JackOfAll wrote: > I haven't done this yet, but my intention was to cut the molex connector > from a molex to sata power adapter and solder to the 5V DC inlet on the > carrier board. If you're using an SSD which only needs a 5V rail (and > doesn't need a 12V rail), it should be possible to power both the board > and the SSD. ISTR, that my Intel SSD's only pull 500mA, so with a 2A > power adapter there shouldn't be any issues.
That sounds a very good solution Clive! To be honest with you I am still thinking whether to buy a SSD drive or not, as I have got more than 500 GB in Flac and the 512 GB SSD drives are quite expensive:) Primary system: Squeezebox Touch, iPengHD/Squeezepad on iPad3, Little Doc DAC I, Virtue Audio One, Philips DVP3580, Mission M34i. Secondary system: Wandboard Dual with CSOS R4, iPengHD/Squeezepad on iPad3, Cambridge Audio DacMagic, Cambridge Audio Azur 640C V2, Little Dot III, AKG K 702. ------------------------------------------------------------------------ albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix